3006c moisture problem

greenstreak

Member
exMember
Joined
Mar 8, 2004
RO Number
12942
Messages
320
READ this and see if Garmin should stay behind this unit. I would appreciate your thoughts on this.
I was told today by a Garmin tech that mositure behind the screen on certain models of their GPS's is normal right now. That their engineers are trying to figure out how to stop it from happening in a state like Florida. The tech told me that since the unit is close to the water and so much moisture in Florida that is causing it to happen. This moisture was on my screen for 1 1/2 hrs last Sunday. I couldn't use the unit to navigate with cause the moisture was so thick I couldn't see the track. I told him they could refund my money and he said they don't do that. So, I have a unit that has a major problem with and I am suppose to just keep the unit. The tech at Garmin told me most will have that problem in a state like Florida with the older models of the 2000 and 3000 series.That they had corrected the problem with the newer models. My unit is only 6 months old. I will never buy anymore of their products with this problem. People should stay away from their products.

Art
 
Where did you buy it? Have you called them or brought it to them for replacement?
 
hey KiDa--- I haven't contacted the merchant I purchased it from yet. I have sent it into Garmin once and they replaced the inside and it now has more moisture in it. I am going to send it in again and see if it still has that problem and then I will contact the store where I got it. They have a 30 day return policy. Heck, I have only used the unit about 6 times since Feb. I didn't experience this problem until I used it in May. They will probably tell me I should have sent it back during the 30 days. I had it for a month before it was even installed.

Art
 
Regardless of how your case with Garmin comes out, but I have a 3006c. Not in FL, but NY. And from time to time it gets that moisture behind the screen. If you slightly open the little door that covers the removable map/memory cards for an hour or so, it allows the trapped water vapor to evaporate.

I know this doesn't solve the issue you're having with how Garmin supports their product, but at least you'll be able to see your screen in the interim.

ed
 
Hey funinthesum---How old is your unit? I was told by the tech that the newer models like the 3206c doesn't have this problem. Garmin has manufactured a product that has problems. When a person has to wait an hour just to use it is not acceptable. Did you ever complain to Garmin about this problem?

Art
 
The Bottom Line is this...

Any time any of us consumers buy a product and that company does not "stand" behind it-Get a new company...

Let them know the "word" is out!

I have a Garmin Product on my boat-not sure now of the model number, but if it malfunctions- I will deal with Garmin.

I don't think they want all the bad press out there!

Keep us informed on your problem.
TJ
 
I received a call from the manager in the marine division of Garmin today. He told me the engineers have developed a new lens for this series and it stops the moisture problem. He told me the lens should be available very soon and they will replace my unit with the new lens. I will keep everyone posted on the progress.

art
 
My experience with Garmin has been outstanding. I have had a couple of street pilots that were troublesome, and they did not hesitate to replace them. Give them a chance to make it right.
 
Art - my unit was purchased in early 2005. After seeing your post, though, I think I'm going to have to start complaining about the moisture, maybe get a new lens out of them...

Honestly, though, it is actually rarely a problem, and when I do see the moisture, it's only maybe 1-2 sq inches....

Ed
 
hey funinthesum---The mositure in mine covered over 80% of the screen. Also, it got so thick I couldn't see the track behind it. Mr. McMahon (the manager)at Garmin's marine division said they have been having this problem for some time now. A lot of people complaining around the country. They tried one fix he said but it didn't work on all the units developing moisture. The new fix is a completely different type of lens behind the screen.

Art
 
Ive had two recent bad experiences with Garmin and will not buy their products anymore. Have a 2006c gps/plotter. Recently upgraded my Blue Chart that they promoted. After installing it, it showed me traveling across land when I was actually in the fire Island inlet. That would be disconcerting at night to say the least. Called Garmin and let them know. They told me to fill out a trouble sheet so that Blue Chart could correct it for the NEXT version. I said what good does that do me now, are you going to send me the new version. No.They seemed to blame it on Blue Chart as their problem but I said Garmin uses Blue Chart so I would say its a Garmin problem. Second problem is when I added the depth sounder/ transducer (from Boatfix). I have always mounted transducers inside my hull and have two of them there now. I got the transducer from Garmin, mounted it and it simply wouldnt find the bottom. I called Garmin and had a tech tell me that this sometimes happens. I asked if he had heard of this problem with anyone else. He said "Oh yeah",that all of these transducers act differently. I said is that what you call quality control? I ordered and installed a transom mount because I am so far into it at this point. Both times these guys offered zero help. Never again will I buy their products and I will keep telling my story. I also took a digital picture of the screen of the GPS when I was cruising over the "land".
 
Art - remember in a previous post where I said the problem wasn't that bad for me..? Well, I now eat my words <MUNCH MUNCH> the problem is bad.

Can you forward any of the contact info, or resolutions you've gotten? I need to call Garmin - maybe if enough people do that we can force action.

Thanks,
Ed
 
I had one problem with Garmin a GSD-22 defective out of the box. I contacted my dealer and got an advance replacement. The problem was solved with the new unit. Other than that I haven't had a single problem other than their support guys are not that good when you have a question that is not covered in the installation manual. Take care. Bill
 
I have the 2006C, I bought back in summer 2005.
After a few months I noticed the screen would fog up to about 2x3", eventually burning off. Very annoying. I called Garmin Customer Support, started a ticket, sent it to them and they replaced the front of the unit and transfered all my saved waypoints, fishing spots, etc.

Now, 7 months later, the screen's coating is delaminating, for a lack of a better word. I emailed them, they said I should send it in...what a real pain. In the off season, it only took them two weeks but now I am gearing up for fall fishing and I need to make a choice.

Haven't decided yet!
 
funinthesun---I haven't contacted mr. McMahon at Garmin International yet. He told me to call him back in about 3 weeks. I haven't had time yet. I will call him next week and get an update on the new lens release date. I will post the information here.

Art
 
Back
Top