Anchor Chain length

II Lucky

Member
Joined
Nov 4, 2005
RO Number
19470
Messages
16
Currently I have 5' of 5/16 chain which has been fine for our anchoring needs in the Columbia, Willamette and the Mountain lakes. My #13 Danforth style anchor has served us well in our anchorages. I would however like to add more chain (wanting overkill I guess). Chapmans says 15' of 1/4 chain is recommended for my boat (29'9"). Currently the 5/16 does not fit between the locker door and deck so I end up storing the 5' above deck. I could store the 1/4 below deck and have a neat and tidy anchor locker. The difference between 1/4 and 5/16 seems to be substantial when I hold the two lengths of chain. I have not been able to find a source for the weight difference of 1/4 and 5/16. Am I gaining anything by adding additional length of the 1/4 or would I be better to keep the 5/16'?
 
A few things come to mind immediately.

Has your boating anchorage place changed? If not, why change the current working setup?

Is the boat 29'9" LOA or LWL? Measure LWL or more importantly weight fully loaded to determine your needs.

You WILL get tired of separating and storing the extra chain will get old REALLY fast.

I had an all line 150' of rode on an 8 pound anchor for 2 years on my 2465 Regal and never had the anchor let go. Granted I was inland, however, the river tides run 4-7 knots depending on weather. A 7 to 1 scope always held me.

IMHO, the only thing you are gaining is weight.
 
A lot of information states you want a min. of equal length of chain to the length of boat..... I use 45' of 3/8th chain on my windlass with 300' of 5/8th rode. But in Florida we also do not anchor in deep water.
Plus going bigger on the anchor will help a lot. The anchor I have for my 43' Hatteras is 'aized" for 55-65 ft boats.
If your boat calls for 1/4" chain and you can store it neatly, stay with that. Add length and add a bigger anchor, using the exiting anchor as a back up.
 
i'm not sure i understand the storage problem and the need for a neat and tidy anchor locker. it's where you store your rode... tidy ?

i'm a big fan of using as much chain and the biggest anchor as possible...

if 1/4 chain fits in the hole, then use that...

i woudln't sleep well at night with a 13 lbs anchor on a 30' boat, i'd go for a 25lbs...

you dind't say if you a windlass, probably not since you dont' mention it, i guess that may limit your option but if you can handle lifting a 25 pounder with 30' of chain, that would be ideal.

or... if a danforth works well in the bottoms you encounter, take a look at a Fortress. being alum. they are lighter yet hold better in most test than the basic steel danforth. I have an FX55 with all chain, and even though it is not really oversized for my boat, its holding power in sand and mud is just incredible.

the weight difference between 1/4 and 5/16 is insignificant.. you're looking at 30 or 40 lbs... no impact on a 30 footer.
 
SILVERTON 34 that is the info I was looking for. Thanks. Pascal, I am not using a Windlass and the storage issue is with the current 5/16 not allowing for the hatch to close. I end up storing the chain above deck. If the consensus was that 1/4 would work for my boat then I could store that in the locker. I would assume that Maxum intended 1/4 and that is why the 5/16 is too big. I would like to add more chain weight to the anchor and that is why I was curious with the weight comparison. We have not had holding issues but, I have always felt that more chain would be better. Just trying to be on the safe side. Thanks guys.
 
I am sold on "more chain" as well but have a 26' boat where an all-chain rode would be too heavy on the bow. There is no windlass on our boat either and I boat primarily in an estuary.

I picked chain that offered the best combination of strength and weight and went with 35' of ACCO 5/16 BBB (AKA 3B). The weight is 1.2 lbs per foot or 120 lbs per 100'.
 
There is a great little reference book "Boater's Pocket Reference guide" By Thomas McEwen, which answers all of these little question.

With a 30 foot boat, if you want 1/4" chain, then consider the HT (High Tensle) since it is actually stronger than the 5/16 CP or BBB Chains.

The Standard 13 Danforth, does not has as much holding power as a HT Danforth 12--and I used a HT 12 for many many years on both a 30 foot boat, and even as a usual anchor on a 45 foot racing boat, where it was important to keep the weight down--and we had enough crew to stand anchor watch if we had to anchor. Granted if you want a plow--you should be going with 22 Delta or 25 CQR--I prefer the Delta, for better setting and holding characteristics. The HT Danforth and the Fortress paterns are virtually identical, and I dont' see much advantage in most sand bottoms of one over the other. In mud, the Fortress can be set to the higher fluke angle, and there is an advantage.

As for length--I dont' see that there will be much difference between 15" and 5'--it is mostly chafe protection. Neither the 5/16 or 1/4 is really heavy enough to give much more weight to keep the shank down on setting--and if you come up hard, the cantry will be gone anyway--so that the nylon rode will take most of the shock load. Go with what works for you. Ideally I like 200 feet of chain backed by 400 feet of appropiate sized line, as light as possiable, with the anchor and use conditions--and a windlass to pull all of this up...
 
OK, being an ignorant lake boater, I am going to ask the stupid questions:

1. What is the purpose of the chain? Why not just attach a line to the anchor?

2. What is "rode"?

3. What is a "windlass"?

Thanks!
 
cant' do what ?? no idea what you mean !

lake or ocean is not a criteria... there are many deep lakes where anchoring can be as if not more challenging than along the coast.

chain does 2 things... first it protect the line from chaffing on the bottom and eliminate the risk of your line getting cut by rocks, etc...

second, it adds weigth which means the anchor will be pulled more horinzontally and has better chance of digging in.

it's not the weight of the anchor that holds the boat, it's its shape and ability to dig in the bottom.

rode is the combination chain/line attached to the anchor.

windlass is an electric (or hydraulic on larger boats) winch used to retreive the anchor...

the key about anchoring questions is the bottom and depth you anchor the most in. 200' of chain and 400 of line is almost useless if you only anchor in 10' of water. just like using all chain doesnt make a lot of sense if you routinely anchor in 100'...
 
Actually rode is the nautical term for line(rope) chain cable or the combination. Anchor rode is the nautical term for the above attached to an anchor. You can have an all-line, all-cable, or all-chain anchor rode as well as a combination anchor rode.

Silverton_34, I think we should be polite to all individuals on this site--we all learn by questioning.
 
Pascal, thanks for the reply.

I have a ski boat I use in shallow man made lakes, so deep water anchoring is not a concern for me. I have a line attached to an anchor that I use when I need to park for a little while but was unfamiliar with these other terms.

Silverton_34, next time I will address all my questions directly to you since you already know everything.
 
This is the problem with emails and other text postings, things can be taken out of context or misinterpreted. Mike F thought you were making fun of me also, so I was not completely off base here. Maybe it would have been better to say "Pascal....I bow to you on this one. I'm just not as good at explaining things as you are" and then there would have been no confusion.

I am very careful of what I say when I send emails or post text, so as not to be misinterpreted in my meaning or my attitude.
 
I see Silverton_34's posts were first edited and then removed. I will take the high road and not repeat them here, but this is why some of what I said above may not make sense now.
 
I think that I will go with 20' of 1/4 chain and then look at upgrading my anchor. Like I mentioned in my original post, I have not had problems with holding but just wanted to add to my holding power. My instincts were to go with more 1/4" . Thanks Silverton and Pascal. By the way Silverton is on our short list for the next boat. Seems to be great quality for a production boat. Thanks again to all who posted.
 
It wouldn't hurt to upgrade your anchor. I use a Danforth Standard 1300 (16 lbs.) on the 26' and don't feel it's too large at all, especially when I anchor in areas with current and 35 MPH wind. Danforth rates that as 20k anchor for a 36' boat.

Using the Danforth Standard anchor as an example, you might consider moving up to a 1600 (25) lbs. anchor. Danforth calls that a 20k anchor for a 40' boat. Depending on how comfortable you are with handling a 25 lbs. anchor, you may want to consider a lighter weight anchor of similar design, like the Danforth High Tensile or the Fortress anchor. Those will give you improved holding power with less weight (at a higher cost).
 
So, Bryan, I see you've come to a conclusion on anchor chain... Now its time to look at anchors. I found a great source for stainless steel on ebay for a bruce style anchor... Less than $200 for a 22# Inquiring minds want to know... is that the next step?
 
Yeppers, Doug. If I end up keeping this boat another couple of seasons which it looks like we will, I should just add the windlass. The boat is already prewired from Maxum for it. I think the anchor upgrade is a good idea. My current anchor would be a nice back up. I take it that your recommendation is for a 22# for my boat? I travelled through a couple of forums with this question but I think you answered my question day one on IBNW. Thanks. It is always interesting to get all of the different opinions and experiences and BoaterEd is always one that I appreciate participating in.

Bryan
 
The other numbers I gave in my last post are the Danforth model numbers, which are also the holding power ratings for each anchor (in lbs.). That number is more important that anchor weight when picking an anchor to hold a boat in wind and current.

Marine equipment reviewer have so soundly trounced the Bruce anchor lately that the company stopped making anchors for the boating market. That's why Bruce anchors are on eBay.

I'd better add that a lot of boaters like their Bruce anchors. They are particularly popular in Puget Sound.
 
Back
Top