Cleaning off Barnacles

Sandy K.

Member
exMember
Joined
Mar 15, 2001
RO Number
3775
Messages
406
Went to the boat the other day and noticed that my running gear - shafts, struts, props and rudders have small dried-out barnacles on all the surfaces. Boat sat idle for a month before being hauled in the fall. Had cleaned some of the big ones off, but left the remaining for Springtime.

I'm thinking that I will get a wire brush from the local hardware store and go to town on them. Before I do I figured I check in with the "experts" to determine if my plan will be problematic. If so, any other suggestions for cleaning up the gear prior to re-launch in a few weeks??

TIA,
 
I'm no expert but I don't know if I would choose barnacle scraping as a subject to become expert on, anyway. try carefully brushing on some muratic acid. it dissolves them and you can hose it off. you also might want to paint it. Tim
 
Scraping barnacles stinks. Try some MaryKate On-and-Off for Outdrives. This version is listed as safe for bare and painted metal. Save the wire brush for the stubborn spots.
 
Use the Marykate On Off and than just finish up with a scotch pad. Will look like new.
Al
 
The Tim Taylor method. Use a piece of leaf spring sharpened like a chisel. Putty knives are just sooo wimpy. Coarse wire wheel on a grinder. Watch out for bits of wire wheel flying off. Muriatic acid & an old paint brush. Slop in the places the wire wheel & spring chisel could not reach real good. Don't breathe the stuff.....nasty. Rinse thoroughly. Afterwards drink plenty of beer to get the taste of barnacle, paint dust, & acid out of yourself.
 
Back
Top