crusader elbows

hounddog

Member
Joined
Jul 25, 2004
RO Number
14582
Messages
18
Has anyone had to cut the two bottom bolts on the elbows from the 4" risers? Mine are striped, I did buy some bolt removers to try from sears. will find out if they work this weekend.
If anyone did cut what tool was used? They are 1985 350s
 
Use penetrating oil on them, let it soak in. Some people use heat and cold to expand and contract the pieces.

Cutting them should be a LAST resort.
 
the first time i did my elbows and risers i could not get the bolts off one engine.finally, i took a sawsall to it and cut the whole thing off in one piece. elbows and risers together. then it was easy to remove what was left of the studs. i.ve been through all the banging, and greasing and bloody knuckles. i wont hesitate to cut off again. that said, i check my water passages atleast once a year . its much easier to get them off now.
 
It's no biggie to cut/grind the heads off bolts. Makes removal of the risers or manifolds easier and easier access to the bolts after.
 
Thank you for the replys. I will let you know how I do this weekend.
 
Back
Top