Display documentation numbers

WALSHIE

Well-known member
Member
Joined
Jan 1, 2000
RO Number
2124
Messages
2,376
The "anchor required" thread reminded me to ask this question...

I documented my boat. It is a law that I must have the documentation numbers permanently affixed to the boat.

The USCG Aux that did a free safety check said I must have the numbers easily visible and he recommended inside the cabin. Since I heard of others putting these on the hull inside the bilge, I inquired. He said no, they must be easily visible and the bilge is not (I guess that's subjective). My cabin has either wood or vinyl coverings just about everywhere so I don't see how I can permanently install any way.

What say you?
 
I was under the impression that they must be in a visible area adn the bilge is where most people have them. Usually to the hull of stringer. They must be affixed so in order to remove them damage to the boat will result.
 
well, VSCs are free... so you got what you paid for :-)

he's plain wrong, doc numbers must be permanently affixed to a structural portion of the boat. wood paneling is not structural.

hull, stringer or bulkhead is were Doc nrs are usually placed. They can be in the ER, anchor locker even if it's big enough. On most boats you don't have a lot of places where you can put them in, ERs often have sound proofing material for instances.

From the USCG NVDC:

"HOW DO I MARK MY VESSEL?

The official number assigned to documented vessels, preceded of the abbreviation "NO." must be marked in block-type Arabic numerals at least three inches high on some clearly visible interior structural part of the hull. The number must be permanently affixed so that alteration, removal, or replacement would be obvious and cause some scarring or damage to the surrounding hull area."
 
Pascal is correct, the Coast Guard Auxillary is wrong in this instance. They should be located in a place not in plain view of all who enter your boat, but in a place where thy can clearly be seen by law enforcement should they request to see them.
 
We also have to display net tonnage so I had a sign made up on fiberglass cloth with the official number and tonnage and had it fiberglassed onto a stringer easily visible from the engine room doorway. This is exactly where Bob Mitchell had the previous USCG number fiberglassed onto the boat. The evidence of the removal and new number addition was visible.
 
Thanks guys, I'm sure glad I procrastinated. While looking for a boat, I did see one that had the numbers permanently mounted on fiberglass over the dinette...it looked very U-G-L-Y. I have the perfect spot, where they can be seen while the engine hatch is open inspecting the flame arrestors.
 
i was going to ask close to the same thing myself today so good to see this thread. I never thought about it but it occurred to me that the previous owner on our boat never put the #'s on the hull to mark the boat as required. I want to do this this week as it should have been done ages ago and at a minimum should have been done by me when i bought the boat over a year ago- just never thought about it!

How have you all done this if you are going to do it yourself? Would it work to just get the self-sticky #'s (like you'd see on a mailbox or something??), afix them to a bulkhead, and then cover with a coat of varnish? I've got a couple of spots in the ER of my boat I can do this but not sure what materials would be best. I actually read through the USCG rules last night and it does not state it has to be in the cabin...bilge/ER are acceptable:
 
I cut mine into a (structural) cabin bulkhead with a router. They were behind a cushion so not visible but still readily accessible.

"We also have to display net tonnage so I had a sign made up on fiberglass cloth with the official number and tonnage and had it fiberglassed onto a stringer easily visible from the engine room doorway. This is exactly where Bob Mitchell had the previous USCG number fiberglassed onto the boat. The evidence of the removal and new number addition was visible."

I'm wondering why it was necessary to renumber the vessel. I was under the impression the whole reason for them was they were supposed to be PERMANENT... Sorta like the VIN...
 
Willie,
Gary bought his boat here in the USA but took it up to Canada. They do things funny up there- like live in snowy winterlands for 3/4 of the year! :)
 
varnish isnt' enough. get stick on numbers, like registration numbers then put a layer of glass mat with resin. simple... permanent.

or cut the letters in a piece of plywood and glass that in place...
 
There's a co out there that says they have the answer. For about $80, they'll display your #s on about a 2 foot piece of plastic that you can screw onto a stringer! I don't think that meets the requirements. You could just unscrew it and go. Sure looks nice though!
 
Back
Top