Al, sorry for not explaining about "unthickened" epoxy. It's actually very very simple. Most epoxy's are two part which you mix according to the mfg's instructions (often 1:1, but read the label). You MUST mix the right proportions. This is not like other resins where mixing more of the hardener makes it cure faster.
Most epoxy's come in the consistency somewhere between apple juice or syrup. If you warm them up gently you can make them just a little thinner (but be careful they will kick off quicker if you do and will need to mix in very small batches). Why thin? Because it soaks in better. Why not thin? Because it won't stay where you put it. Because it has a bad habit of making a real mess!
So, to solve the problems of regular plain ol runny epoxy, you can mix in compatible substances that will thicken up the mix. A few years ago I bought a HUGE bag of colloidal silica (cabosil). It is the consistency of the finest powder you can imagine. Here is how it works, very simple. Mix up your regular epoxy (following the mfg's proportions of parts a/b). Always make sure you thoroughly mix. Scrape the sides of the container and the corners of the bottom of your container. Once you have it mixed, throw in a handful of compatible thickener such as the cabosil (there are many others). Stir! You will get a thicker consistency. Want it thicker? Throw some more in. The two most common mixtures you will work with all the time are unthickened epoxy and something about the consistency of peanut butter. The peanut butter stays where you put it. You can even shape it a little.
Here's the problem with the thick stuff. It doesn't soak very well. So, if you just smooge some thick stuff in a hole, it will actually bond, but often you find you can apply some decent pressure and "pop" out it comes again. So, here's the secret. Mix up your untickened epoxy. Take it straight to your work and paint it on the surface and let it soak in, you don't need to apply to excess. Take your cup of epoxy and now throw in the thickener ad mix it up to peanut butter. If you work quickly enough you will have plenty of time before it starts to kick off. Work in small batches. By now, your unthickened has soaked in, so now apply your peanut butter mixture to the work. The peanut butter mix will bond chemically to the initial thin painting and now you have a bond that is soaked into the work and stays where you put it.
Make sense?
There is a whole world of options as to what to use to thicken. Some are easier to sand than others. Some add strength (fibers), etc.. Don't get to worried. For most stuff you can keep a basic thickener like cabosil on hand and use for most jobs. In a pinch you can use sawdust (wood flour) or even wheat flour (it actually works). Not every powdery substance will work so only choose things that you know work with epoxy.
As mentioned, you can buy epoxy's that already have thickeners mixed in. They are convenient, but you can't make a thick epoxy thin. Okay, well actually you can, but this goes beyond basics and best that if you don't do this all the time to stay away from that. That's why I like to buy your basic off the shelf expoxy (thin) and a bag of thickening powder of some sort. I can mix anything I need then easily and quickly to suit the job.
bp