Extra Engine on Board

ihab

Member
Joined
Feb 18, 2008
RO Number
29436
Messages
2
This might sound a bit off....How would you install an extra outboard motor on a 27' cruiser in case of engine failure.
If applicable, what would be the minimum HP outboard for 7500# boat.

Cheers,
Ihab
 
Get a bracket on the transom and mount it there. HP depends on how fast you want it to go. An 8 HP will get you home, slowly...
 
"Extra Engine" aka "kicker".

Common practice around here, especially in boats w/ one O/B. HP ranges between 10 to 20 hp. The goal is 5 to 7 kts. which will get you home faster than waiting for the tow service to arrive and tow you home ( at 5 kts... ).

There are many different styles of bracket to mount these small engines ( sailboats use them for main engines... . Some are better than others. The stronger ones are the better ones.

Here is a link to the Garelick auxiliary bracket web page. There are many other mfgrs as well.
 
...and where you boat is a consideration on engine size. Mostly talking about tidal/current movement in estuary or river locations.
 
10hp woudl be the bare minimum, 15hp would be better. in any case get a long shaft so that the prop doens't cavitate and probably a mount that allows you to lower the engine closer to the water.

years ago, i used to have a 15hp long shaft on a 25' express but that's because the boat was in the islands with no towing service. if you're up here in an area with good tow coverage, unlimited towing coverage is cheaper and easier...
 
quote:

Originally posted by PascalG

........... if you're up here in an area with good tow coverage, unlimited towing coverage is cheaper and easier...





Yea, I don't see a lot of 27' cruisers around here with an "extra" outboard motor installed.

Let's say your primary engine fails because of contaminated fuel. What happens to the outboard unless you have a seperate fuel supply? If the outboard is electric start, how will you start it if the boat's electrical system has failed? How are you going to steer the boat under outboard power? On many boats, it would be next to impossible to install an outboard engine, even with a bracket.

If you really feel the need for two engines you would be better off with a boat with two engines as standard equipment.

Spend your money on maintenance and an unlimited towing contract. TowBoatUS and SeaTow are two well known ones.
 
Having suffered engine failure, I have thought the same thing.
A small pull and electric start outboard with a seperate fuel tank is imo a reasonable idea. If a new one is too expensive, there are plenty of decent used ones out there.

Sure, a towing service is an alternative, but what would you do if you need power very quickly to prevent drifting into shore/rocks and cannot wait?

IMO a spare engine is like a spare tire for your car. We all carry one, even if we have never needed the spare in years, if ever. But it means 'peace of mind'......... (and a trolling motor for fishing)
 
quote:

Originally posted by BlueMonday

........... but what would you do if you need power very quickly to prevent drifting into shore/rocks and cannot wait?





Drop my anchor. Just like I saw our marina manager do when a boat he was moving lost power.
 
if you're so close to the rocks that you don't have time to drop anchor, what makes you think that you'll have time to pull your outboard fuel tank, connect it, and start the engine in time? speaking of which, keeping a small outboard fuel tank on board is a PITA...
 
Well, I presume you would leave the spare motor hooked up all the time a la trolling motor. A well-done installation should tuck up and out of the way nicely.

As for the anchor comment...... using the anchor first in a drifting emergency is obvious.
My point was anchors sometimes drag..... around where I boat a lot, the lake bottoms often are smooth rock, hence anchors love to drag enough that I cannot rely on them as a safety device.
 
Up here on the great lakes, where trolling for salmon or walleye is very popular, many big boats have small outboard kicker moaters mounted on the transom for use while trolling, not only does it save on hours on the big engine(s), but it burns a whole lot less gas over the course of a season. It also gives you better trolling speed comtrol than trolling on the big engine.

Many guys have a 8 hp 9.9 hp or even 15 hp (on the bigger boats) high thrust OB's, either 2 stroke or 4 strokes with an ez-steer connecting rod to connect it to the main engine so you can steer from the helm.

Here is an example of that setup on a 27' Baha Cruisers 277 GLE. his is a 20 hp Honda, but I'm sure a 15 would be plenty for that boat.

2423675020065410114S600x600Q85.jpg


I don't have one myself, mainly because I don't have any good place to mount one without taking off the full width teak swim platform, and I don't want to do that.

Tim
 
There are lot of boats where mounting an extra outboard motor would be difficult, impractical, and pretty ugly. The comment above about a full width swim platform is an example. Anyoune who feels the need to have an extra motor should consider this when purchasing the boat.
 
Thanks for all the input....I came across a trolling system where they mount the proppelers of the trolling motor on the fins of the outdrive....usually 2 proppelers...did anyone seen this setup before........and how does it work.

Cheers,
Ihab
 
Back
Top