Marinette

jtrainer10

Member
Joined
Jun 28, 2007
RO Number
27069
Messages
5
I am thinking of buying a 1976, 32', flybridge Marinette. It has twin 318 Chrysler engines. The boat appears in good shape and I'm having a survey done on the boat. Any good/bad things about Marinettes that I should be aware of?

Thanks, Joe
 
They have an owners forum. probably something like "marinette forum" followed by a dotcom
 
Show a pic or two if you can.

1. The boat doesn't do that well in heavy chop so you'll have to pull back on the throttles
2. It was a fast boat back in it's day and rides very nice on flat days
3. You won't want to see the bill for a new paint Job if it needs one !!
4. Overall the layout works very well even with four living aboard ( 2 adults and 2 kids )
5. Great overall boat with nice woodwork on the inside
6. Handles well around the docks

If I think of more I'll post them
Mark
 
Chrysler Marine engines are nigh indestructible. I have them in my Trojan and am fairly impressed with them.

Hint: My engines have 1200 hrs on them, they're 24 years old and compression on EACH cylinder is still right where it's supposed to be. They've never been rebuilt.

I've never had a Mercruiser hold up that well for 8 to 10 years!

I'm considering putting the Edlebrock Multiport fuel injection conversion on both of them. (new intake manifold, fuel pump, distributor, ignition system). It's kinda pricey at 2,700 each per engine but a good performance increase and a better gas consumption improvement. The other option would be to just repower the boat with new MPI Crusaders or such and that's a lot more expensive.
 
Marinettes are still popular boats and I can vouch for the 318. Good luck with the survey.
 
Marinettes and 318s are bullit proof. A friend of mine has the last 32 built. Outstanding boats.
 
One was tossed up on the shore during Hurricane Ivan. I was amazed that there was minimal damage--the boat was lifted back into the water by a crane and powered off.
 
Marinettes were made in Louisville Ky. They are aluminum and plane very nice. The boats trail easily with the proper licenses. They are all inboards. I looked at a 1972 32 ft as you are interested in buying. I could have bought it for $7500 in 1980. It had new motors. I didn't and wish I had. Since it is welded aluminum you need to pay attention to the zincs.
 
Marinettes are true classics with great lines. There are many of them in my boating area- the Ohio River. I've been on several from a 32 to a 37'. They plane easily, but can get quite rocky due their light weight. One thing to watch for is leaky windows, and as noted above, the zincs. Marinettes were all built with a corrosion monitor. Good luck!
 
A friend of mine in Louisville, has 2 of 'em. He can give you the lowdown on them. He just picked up his second one over the 4th of July Holiday. Drop him a line, he's a great guy:

HeadDoctor (at) Shipshapemarineky (dot) com

(No, he's not a psychiatrist - he's a marine sanitation specialist)
 
Back
Top