Money saving boating tips

I wish it were true that running at slow speeds on one engine didn’t save much money. That SHOULD be true. For vessels that are as old as I am, like Pascal’s, it likely is.

Unfortunately for many of us, every click our hour meters make costs money. This shouldn’t be the case. Hour meters should NOT be equated with automotive odometers, but by much of the late model boat-buying public, they are. (and boat values prove it)

In my example, transiting a series of 8 locks over a span of 26 miles, the average boater can log as few as 6 and as many as 15 hours on the meters. (each way!)

Do that a few times in a late model boat, and you’d better bring a bottle of vodka (and not the fake stuff I serve) when you try to sell your boat.

By alternating engines, and running on a single engine when possible, both fuel and hours can be saved. The fuel savings might be negligible, the hours and long-term savings might not.
 
SLW---but your hour log will not reflect that, will it? Or do you have one hour log for each engine? I've never owned twins........
 
CHARTER. You get what you want/need where you want it & where you want it. Somebody else has to take care of it, insure it & have all the worrys that go along with boat ownership.
 
quote:

Originally posted by Flutterby

SLW---but your hour log will not reflect that, will it? Or do you have one hour log for each engine? I've never owned twins........






One per engine
 
Another thing nobody has mentioned yet is clean the bottom, especially the running gear !

Even at hull speed, I can loose almost a knot... on my previous boat (planning with inboard), a few barnacles on the props alone would make me loose over 1kts, 2kts if real bad... 10%.

if you keep your boat in water a monthly diver more than pays for itself in fuel economy.

another one... on larger boats, run in deeper water. I loose over a full knot when running (9kts hull speed) in shallow water (7 to 10'). There are a few places i often go trhu in the bay that have "holes"... 12 to 15' deep, couple of boat length long, i instantaneously feel the difference when i pass over, confirmed by the sounder and the GPS jumping over one full knot.
 
Pascal: possibly but at 7.5Kts neither engine is loaded much above idle. On one that engine is working a least a little but as i said I would need to do a lot more distance to get worthwhile data.
 
Pascal: Boats "feel" the bottom at depths less then about 7-10X draft. You might also notice that your boat feels a shoal on one side. Apparently a pressure wave moves out from the bow and the boat meets increased resistance when this happens. I once watched ferries in a narrow channel and water movement way in front of the boat was surprising.
 
You mean both engines are suppose to run at the same time? I have run a lot on one engine but not by choice. Really now I try to do as much as I can myself not to put the boat mechanics pockets empty just mine aren't that deep.
 
quote:

Originally posted by Kuredu

Spend way more time on your boat, even if you don't leave the dock.






If, like me, your boat is stored on the third tier of a dry rack system, make sure you bring mountain climbing gear. Hard work, but once you're up there, the view is fantastic!

PS: If running on one engine, I need to use the starboard engine if I want power steering; and I have a mild OCD problem that causes me physical pain when one engine has significantly higher hours than the other one.
 
When you go out on the boat, make sure you have the wife and daughters with you, so they're not shopping...saves big $$$
 
Owners with attractive daughters get all the free help they want.
 
Join the Coast Guard Auxiliary and get free gas while patrolling with your buddies and enjoying your boat.
 
Back
Top