NO GIN ... updates

I guess I really don't know what I am down to. I have never done this with a boat so I am not sure if it's gel coat or primer or even some filler. I guess I will take a pic and post so you all can see the condition and help diagnose where I am at.
 
The helm looks great but I have one question. it looks like it's all one solid structure now, isn't that going to make it hard to work on any wiring issues? On my last boat I redid my helm and like you I replace every gauge, switch and the wheel as well, however I sent the old dash panel out and had them remade out of plastic made to like like burl wood came out great. It's easy to get carried away with projects. By the time i was done I spent about $6000 on the helm which included new shift controller and cables but not the electronics that I already had.

In any event keep up the good work looks like you're almost there.
Enjoy
 
I have a large access area to the electrical from inside the bathroom. I have already tested installing all the gauges and removing them and it's easy. I think I just need to get over this hump and launch her soon!
 
Well I was recommended to a mobile mechanic from a pretty good source so hopefully he is good. He is coming to the house today to install both shift cables and add the 2 new bellows and gaskets that should have come with the kit. he said he will inspect the gimbell bearings and grease everything up and check to make sure it's all good. He is also going to run the boat to make sure everything is working properly and ready to launch. $450
 
Great move on the mechanic Joe, it would still be better if the boat could be launced after he did the work. However I am glad you are getting some professional help. Now on the paint post a few pictures of the areas you are concerned about. Then perhaps we can all form a collective opinion on proceeding.
Speaking of the dash/console I had my dashes (2) fiberglass opened up then I had aluminum plates that were powder coated. I can remove the panels with screws that are about every 3 inches. Your instrument cluster looks great.
Good luck. Bill
 
Thanks Bill. I am waiting to launch the boat until all mechanical and paint work is done. Not rushing this despite what some of the forum members state. :)
 
IMG_2015.jpg
 
That's not a pretty boat... but it does have a "bathroom"!!!
 
Is that a factory installed shore power plug? The location looks .......... unwise to me. I'd relocate it.
 
You'd be surprised how many boat manufacturers feel that is a good place to put the shorepower inlet.

Rinker is one that comes to mind.
 
It means he no longer has the privelege of posting on Boatered.
 
My regal had one there as does my Trojan. Seemed a common place to pu them in the 80s and early 90s I agree, crappy place to put it.
 
Unless ur in the LICC....

oh sorry...

Yea Rinker puts em there. Very well thought out ! Usually aligns perfectly with the slip pole too... Thats a WTF...

Rob
 
Back
Top