Proper towing question

Capt. Art

Active member
exMember
Joined
Apr 17, 2007
RO Number
25924
Messages
1,538
I hope I never need it but if I had to be towed for any reason I'd expect that my anchor line would be secured to the towing vessel. Would there be any additional lines that I'd need secured or any hints from you Old Salts? I weigh about 60,000 lbs. I just like to be prepared.
 
quote:

Originally posted by Capt. Art

...that my anchor line ...




Art
I would have thought that you have all chain for the anchor

I would think that if the line is strong enough for the tuging at anchor it would be strong enough for a tow -
 
Normally attaching the tow lines to two different points on the boat helps to spread the load and will contain the boat if one point breaks free. Can your anchor line do this? The tow rig is only as strong as its weakest point........
 
With the size of your boat join Boat US or Sea Tow. They will tow you safely and properly with their line.
 
quote:

Originally posted by abalmuth

quote:

Originally posted by Capt. Art

...that my anchor line ...




Art
I would have thought that you have all chain for the anchor








Good catch. Yes, I am all chain.
 
While a towing service is nice to have, you should always be prepared for being able to help yourself if you have to. Don't always depend on someone to come rescue you right away. Help from a service may be hours away and you may be up on those rocks in 15 minutes. If there is another vessel in the area that can safely help you, take advantage of it.

One thing I can think of, is that depending on the configuration of your bow roller, you have to make sure that an almost horizontal lead from your anchor rode does not allow the rode to jump from the roller or chafe more aggressively. Actually, ideally, the rode should be led to some sort of bridle, whose legs can be brought up through chocks and secured to backed cleats. Avoid putting the stress directly on the windlass.

EDIT: I now see you have all chain. Even easier. Just take a snubber (two preferably, to form a bridle) and lead it/them to the bow cleats. Be sure the cleats are backed and strong enough for this purpose. The snubber lines and shackles should be strong enough for the entire load, as they will take the stress of the tow off of the windlass.
 
the commercial services will use their own gear to tow you.

depending on your bow set up, you will probably need a bridle, tied to each cleats on the side of your bow so that the lines dont' interfere with your anchor or pulpit. especially since most towboats are pretty low on the water
 
Back
Top