We did it!

Also if you decide she's too much boat, let me know and we'll work out a trade...
 
Great looking boat! While I don't have thrusters, I think Walter will advise you to stay in practice without them. Apparently, they can stop working at the most inopportune times...
 
quote:

Originally posted by Shadowcruzr

Tie a line on the Port quarter piling with the looped end at the length you need on the breast cleat. As you back out, hook the bitter end onto the piling. Same on Starboard side. Then as you come in, you grab that line, get it on the cleat then get your stern lines...






Not sure I totally get it. Are you just adding a permanent spring line to do it? Or are you doing up a special one that's shorter? If I added a port spring line, I would think it would be too long and I wouldn't be able to get it on/off the piling after it did it's job.

Unless you are just looping it around the piling, rigging it with two different length loops, and pulling it onboard when done.

Maybe the dockmaster will know the best way.
 
I don't mean to be repititious, but, if you can learn "Bank And Fill" you can turn that boat in little more than its length and park it in a pickle jar. :)

It is mainly used by sail boats but works equally as well with single screw trawlers.

Bob
 
When will I ever need to park it in a pickle jar?

A Google search for "bank and fill maneuver" came up as EPIC FAIL. Shower me with your knowledge oh most wise and generous Yachtsperson Bob.

(/sappy sarcasm off) :o)

If you mean using the prop thrust to my advantage and thrusting forward and aft with the rudder hard-over, I can do that. Already got a lesson on that from the previous owner. However, with the anti-clockwise rotation of my prop makes that only work if I want to rotate the boat anti-clockwise (to port). So in my case, it wouldn't help me either in or out unless I wanted to turn 270 degrees before going into my slip. Am I missing something. Can it be done both directions?

Help me Obi-Wan, you're my only hope. :o)
 
Good Luck, post some pix of the interior, I'd love to see what it looks like.
 
The previous owner was a master cabinet maker? Sounds like we need pictures of the interior!
 
LOL, I've made it work in both directions. With a right hand prop it's a bit slower and you have to watch the stern movement and get the timing right but it does work. Also, playing with how long you leave it in forward and reverse, you can actually walk the boat sideways. Takes practice but it does work.

When I was a very young lad my Gradfather used to make me practice this for hours at a time. It's really a good thing to be competent at especially in the unlikely event of a thruster failure.

Bob

PS: I too would like to see interior pix of your new lady.

quote:

Originally posted by GonzoF1

When will I ever need to park it in a pickle jar?

A Google search for "bank and fill maneuver" came up as EPIC FAIL. Shower me with your knowledge oh most wise and generous Yachtsperson Bob.

(/sappy sarcasm off) :o)

If you mean using the prop thrust to my advantage and thrusting forward and aft with the rudder hard-over, I can do that. Already got a lesson on that from the previous owner. However, with the anti-clockwise rotation of my prop makes that only work if I want to rotate the boat anti-clockwise (to port). So in my case, it wouldn't help me either in or out unless I wanted to turn 270 degrees before going into my slip. Am I missing something. Can it be done both directions?

Help me Obi-Wan, you're my only hope. :o)




 
You just use the rudder as your stern thruster and spin the wheel hard over, bump it in forward to kick the stern over. Then bring the wheel back if need be. That's way I never saw the point of a stern thruster on a single screw trawler. You have a great big thruster already, it's called a rudder. :-)

Depending on which way your prop rotates and which way you have to turn to back into a slip, you can back into a slip without ever touching the wheel after putting it hard over. Just bump it in forward to move the stern one way and back down to pull it the other way.

http://www.his.com/~vann/KrgStuff/360turns.htm
 
Back
Top