1973 Trojan

matt4x420

Member
Joined
Feb 19, 2005
RO Number
16350
Messages
2
Very simple but obscure question that somebody might know:

What type of wood did Trojan use for their toe rails in this era? (specifically- 25' boat)

Mine is painted, which I have maintained since owning the boat, but the paint likes to peel and looks cheesy besides. It looks like teak underneath, but I'm no expert. I am considering stripping the paint and oiling the wood.. Same for the swim deck.
 
I'd be willing to bet it's teak or one of the mahogany types of wood. You probably have something very pretty under the paint well worth stripping for. Even epoxy coated though I think paint will hold up better than clear finish. You'll have more maintenance but I'm a sucker for pretty wood.
 
Yeah, sort of. Let's put it this way, I was alive and well when this boat was built.

Depends on what your definition of the word knowledgeable is. :)
 
I once owned a '74 Trojan F32 Sedan and the toe rails, swim platform, railing trim, etc. was all teak.
 
I currently own an '83 Trojan F36. Everything on deck is teak, teak, teak.
 
I had a 1975 Trojan F36 for 14 years and yep, all the trim was teak. I replaced all exterior teak (except the hand rails) with white Starboard due to ease of upkeep. I had a lot of teak inside as well and when I did a complete vessel refurb I had problems finding teak lumber large enough for some of the pieces I needed - especially a 12 foot by 17 inch by 2 inch piece that ran the full width of the aft cabin. A local hardwood speciality shop convinced me to try ipe (pronounced E-pay) which is nearly the same color as teak when bleached and finished with spar varnish. The ipe is much harder than teak and is 100% impervious to both water (its so dense that it doesn't float) and insects. I was very happy with the ipe and it was half the cost of teak.
 
Back
Top