A/C Condensation

rnbenton

Active member
Member
Joined
Apr 4, 2009
RO Number
31163
Messages
2,834
I know I saw this posted on here before but I can't find it so I'll ask again. A member asked about A/C condensation going into his bilge and wanted to know a remedy. Someone posted information about a little gizmo that attaches, I think, to the cooling water out flow line and sucks the condensation water overboard.

I currently have mine joined with the head sink drain but this is proving to be less than optimal. if someone knows about or remembers what this little gizmo is called or has a BoatFix part number I would sure like to see it again.

Thanks.
 
Or run it to the shower sump, if you have one.
 
i would not install one of the venturi's in my own boat. in the unlikely event of a blockage in the line downstream or on the outboard side, it would not take the a/c pump long to fill the boat with water. this idea has been around for a long time and if it were widely accepted as a good practice the A/C mfg's would be building it into their product, or offering it as an option.

the best solution, IMHO, is to feed the water to a shower sump and pump it overboard.
 
I have the Mermaid condensator in my boat and it works great. I could not feed the A/C drain to the shower sump as it was a slight uphill run which would cause the drain pan to overflow. I kept my drain hose from the pan to the bilge as a backup in case the condensator malfunctions. I used wire ties to secure the hose from the condensator in a corner of the drain pan and its like a vacuum sucking up the water in the pan. Your cooling water exiting the side of the boat will look milky as the condensator pumps some air into the water, but this is aesthetics only and does not affect the operation of the A/C. Using it 2 years now and no problems.
 
Using mine for 9 years and never a problem. I have one on each unit and the only maintainence is an annual filter cleaning.
 
My brother has one on his unit and it works as described.
There is a check valve in the suction line, so it's not a open venturi. He had a fender ride up over the discharge thru-hull and block the output for several hours and didn't have any water backflow into the drain pan.

John
 
Back
Top