Adding Third Pontoon

masscomm

Member
Joined
Feb 10, 2021
RO Number
1338
Messages
10
Have a 1974 Harris Flote Boat (Pontoon). 28ft with 19 inch pontoons, 85hp outboard. Boat rides very level in water with 10 people on it, but rides very low. three quarters of the pontoons are under water. Question is: would adding a 3rd pontoon make the boat ride higher in the water? If so, what diameter should the pontoon be, and what length?
 
I'm certainly no expert, but a 3rd pontoon would have to give it some degree of lift. I'd probably go with the same size as the other two.
 
i would have to guess that by adding a 3rd pontoon of the exact same size you should increase lift by 33% or make you ride 1/3 higher in teh water.
 
Masscomm,
I won't call myself an expert either BUT we did own 2 pontoon boats before jumping into the fiberglass.

There are 3 different options (4 if someone tells you to get a different boat. jk)

(1) Add a 3rd full-length pontoon - this is the type that incorporates a motor pod (transom) to mount the outboard. With this option, you have to make sure that your cavitation plate is at or around level with the bottom of the pontoon - just like a v-hull boat has to.

(2) Add a 3/4 length 3rd pontoon. You might have to adjust the motor height because of the water coming off of the middle toon.

(3) Google Pontoon Water Glide. This is a great little option. This will probably be your best bet because you have 19" toons now and the standard is 25" or possibly now 27".

I had a 1972 24' Harris Flote-Bote with 19" logs. I wound up installing the Pontoon Water Glide on that old pig. I was able to go from a 25hp Merc (12mph) to a 90hp Johnson (35+ mph). Here is the BIGGY, make sure your boat is structurally sound - enough cross members. The only reason I say that is because I completely overhauled our boat and make it look sweet but it was still weak.

If you go to PWG's site, you'll see my testimonial there.
If you have any more questions, I'll gladly help.
 
Or you could use a smaller diameter pontoon for less drag and only have the full flotation kick in when you are heavily loaded
 
I have read about the "Water Glide" option. I was hoping to talk to someone who had direct experience with it. From what I have read and seen on their web site, the bow will come up, but the stearn will stay low, or possibly go lower....am I correct in this assumption?

Adding a third log should (in theory) lift the entire boat up some. I would have to use (as pointed out) a 3/4 length log in the middle. Would I use the same diam log, or use something bigger?
 
quote:

Originally posted by The Other Gary

Or you could use a smaller diameter pontoon for less drag and only have the full flotation kick in when you are heavily loaded





With an 85hp motor, he would have enough power to get the boat "on plane". If he was trying to run a 3 log pontoon with say, a 25hp that would be a great amount of drag.
Also, a 19" log is the smallest they make (or I should say, used to make) for "full size" pontoons. You can get smaller logs that are made for those little peddle pontoons or swim rafts.

It's taken the pontoon community a while but now there's a market for the bigger toons, bigger motors, etc, etc.
 
quote:

Originally posted by masscomm

I have read about the "Water Glide" option. I was hoping to talk to someone who had direct experience with it. From what I have read and seen on their web site, the bow will come up, but the stearn will stay low, or possibly go lower....am I correct in this assumption?





Yes, the bow does come up. My toons were 24' long and it seems like when on plane (with the 90hp) that the first 10' was out of the water. I don't recall off the top of my head but my pontoon boat DID sit higher in the water with the PWG attached. This will definately change the handling characteristics of your pontoon boat.

quote:

Originally posted by masscomm

Adding a third log should (in theory) lift the entire boat up some. I would have to use (as pointed out) a 3/4 length log in the middle. Would I use the same diam log, or use something bigger?





If you can find a 19" log then that would be the better way to go because you are lifting across the entire length not just 10-12'. The PWG is a "one size fits all" - what I mean is they don't make one for a 18-20' and another for a 28-30'...so it does more lift on a smaller/lighter pontoon boat.
If you are going the 3rd log route. You might want to check EBay as they can be found there. Also go onto Pontoon & Deckboat Mag's forum. Good people over they and they all live, eat, sleep and sh*t pontoon boats.
 
Speaking as a person that has gone thru what you are doing now...You are dealing with an old pontoon boat that won't be worth much of anything when you get rid of it.

I'm not saying this to knock what you have for a boat or what you plan on doing to it.

I've been thru this and took it in the shorts on trade after I spend thousands on improving it.

And to be honest with you, we were quite happy with our restored pontoon boat...for a while. Then you realize that it would be nicer to have bigger logs (for more capacity and a higher/dryer ride), a better bimini, etc etc etc.

I was told that my old pontoon was worth $700 on trade in no matter what because the bank looks at the age of the boat, not the "extras". So I asked the dealer if I could remove my stuff from it and get the same and they said yes. So I removed my new stereo, 4 speakers, Pontoon Water Glide, TAP fins and 90hp Johnson.

It was heart breaking to remove the stuff that I so painstakingly put in but I was able to use the removed items on the next pontoon boat.

We had 2 pontoon boats before the cuddy and now the cruiser.
 
Back
Top