almost capsized

dashizzzkat

Member
exMember
Joined
Jun 20, 2007
RO Number
26898
Messages
148
http://www.kladblog.com/content/html/200901/bootje.asp what made that happen?
 
caught in the undertow of the bigger ships screws
 
Not caught in the undertow, at all! It's a ship assist tug with a towline up to the ship, and the tug got way, way out of position, and was being pulled over by the ship until the towline was cut or parted (the towline is visible in the video).
 
That is called "almost" getting tripped. Bill is correct the tug was way out of shape. Any time a tug makes up to a live ship with the stern bitt, a quick release line (or a pelican hook) should be rigged between the bitt and the tow line. If the tug gets out of shape, the deck crew pulls the quick release or trips the pelican hook, releasing the towline. Also an axe should be nearby to chop the towline if all else fails.
 
Looks like the two guys by the cabin door went overboard...
 
It appears that they were using the wrong kind of tug for indirect towing or escort duty. Meaning a standard screw & rudder type tug instead of a tractor tug with azipods or cycloidal propellors; just a guess though!
 
Boy you guys got good eyes. All I could tell was the tug was moving backwards, either by itself.... or the tow line.
 
Agree with Bill and L Keith, the tug got out of shape and was nearly sunk. Many tugs of that type have a hydraulic release for the tow, and I'll expect that's what saved them. Agree it looks like the "wrong" type of tug for the job, but it was probably all they had. Tug probably was fine pulling the ship off the dock or turning it, but there was a mis-communication somewhere, and the tug got caught by surprise when the ship went ahead. I'm guessing the pilot told the tug to let go, and then gave the engine command to the ship without making sure that the tug was away. If the tug was there for steering or braking, he should have been on the tug's BOW bitt, then he shouldn't have had any problem.

They were darn lucky... another second or two and the tug would probably have gone down, taking the engineer and possibly the guy in the wheelhouse with it. The ones that fell overboard would have been the lucky ones!

An axe would probably have been useless against a steel tow-wire.
 
On a standard shaft/wheel tug you do not use a tow wire in ship assit work for this very reason, only soft lines. I've had ships/barges take a sudden unexpected shear, putting the tug in irons really fast.
 
The towline does show "light" in color which might indicate synthetic. Even then I don't know if a man with an axe could have cut it in time.

Any guesses what port that is? There's a cable-stayed bridge in the background but I still can't place it, nor can I place the design of the tug.
 
the watertight doors were wide open a very common mistake that often leads to sinking instead of righting itself the guys that went over are lucky someone went to all stop or neutral
 
yea that's just what I was gonna say . . . . .azipods or cycloidal propellors
 
I hear a "slapping/clapping/cracking" sound just about the time the rope lets go. Is that the rope parting or the buttocks of the crew of the tug slapping together? Definitely a sphincter tightener.

After an episode like that, I'd have to go ashore to belt down a strong on one...or two ....or three. I might not even make it to shore. Some need to count their blessings for sure.

Bob
 
As L. Keith says, the tug got tripped. Sea Tow Ft. Lauderdale lost 2 boats to Wayne Huizinga's yacht a few years ago when the captain decided to "help" with an ungrounding by putting the engine in gear. Any time a tow boat gets more than 45 degrees off the towed vessel's bow, there's a very real danger.
 
Back in the eighties at Praia do Vitoria, Terciera, Azores, we almost lost a 100 ft tug due to tripping. Tug was using a tow hook with quick release pulling the ship's bow off the pier, up wind, so the ship could depart and clear the down wind breakwater to port. The 5 inch diameter, synthetic 8 plait Tow line led from the ship's starboard focsle to the tug's tow hook. The ship went full ahead with 20 degrees left rudder before releasing the tug (bad commo from the Pilot). The tow hook jammed against the stop on the "H" bit and would not release. Tug crewman hit the line with a fire axe, didn't hurt the tow line and the rebound almost carried the crewman over the side. Ship's bosun touched the tow line at the focsle with his knife. Line parted, snapped 200 feet back to the tug without touching the water, and crushed three empty 55 gal lube oil drums forward of the "H" bit. No one hurt, amazingly. After that I had the machine shop fabricate 3 ft long, 3/8th inch thick "machete" type knives with very sharp, serrated edges, for emergency line parting use. Fortunately, never had to use them.
 
Doing the same thing at the boat's bitt would have the same effect.

Moral of the story - don't get in the Boatswain's Mate's way - they know what's up.
 
Back
Top