Aluminum Trailers

JZ

Member
exMember
Joined
Feb 21, 2003
RO Number
11176
Messages
117
Hi, looking for some references for a new aluminum trailer. Triple axle for a 30' boat.

Any one have suggestions of where to look? I'm in SoCal, but would like to take delivery in Phoenix or Tucson.
 
You might try "A B Trailers" of Southern California. They have a web site.
 
I had a FLOT-ON triple axle trailer, all aluminum, I-Beam construction, 4 wheel disc brakes, tortion bar suspension. It came with my old 29' LOA 8500lb. Formula. Oddly enougn, it did not have a stantion for winching the boat up to the front, I guess it was called "Flot-on" since you were supposed to entirely "float on". I custom built a stantion, ended up working OK.

Funny thing, at the ramp one day a guy said he had the same trailer with wooden bunks and the trailer would actually become buoyant after the boat was launched. I bet that boat was tough to load up when the day was done...not sure I'd recommend this brand.
 
Float On trailers usually have winches and are highly respected trailers. (I have never heard of a Flot On trailer). I had a Pacific trailer, and it served me well. I did have a chance to visit their factory last summer, and was not all that impressed with what I saw--they still seem to favor galvanized trailers (a West Coast thing). They were using Tie Down brakes. Kodiak
brakes are far superior (and more costly).

Generally I would recommend dual axle trailers over tripple unless you need the capacity, they are more difficult to maneuver in close quarters. I have a 14,000 lb capacity two axle trailer.
 
I've got a Float On trailer. I have to say they support their product very well. And this thing would NEVER float (way too much metal for my 30'x10' cat).
 
quote:

Originally posted by TIMEOUT90

Funny thing, at the ramp one day a guy said he had the same trailer with wooden bunks and the trailer would actually become buoyant after the boat was launched. I bet that boat was tough to load up when the day was done...not sure I'd recommend this brand.





I bet the same guy still believes the moon is made of cheese.
 
quote:

Originally posted by mandm1200

quote:

Originally posted by TIMEOUT90

Funny thing, at the ramp one day a guy said he had the same trailer with wooden bunks and the trailer would actually become buoyant after the boat was launched. I bet that boat was tough to load up when the day was done...not sure I'd recommend this brand.





I bet the same guy still believes the moon is made of cheese.








I've seen this mentioned in other boating forums and I've seen it happen myself at a ramp with considerable sideways current.
 
My mistake, they are "Float-on" trailers. No stantion on mine, like I mentioned, but it did tow nicely with the three axles. Didn't mean to offend, it just didn't meet my needs without modifications.
 
You cannot say that all aluminum trailers are bad any more than you can say that all galvanized trailers are bad. If the trailer is properly constructed, they are both excellent trailers. Yes, in a heavy current, the 3 axle trailers can be pushed sideways by the current.

I had sold a boat which had a 3 axle aluminum trailer, and the new owner brought it around to the nearest ramp. My wife had brought the trailer around--and backed it down, then pulled it out, and back again, several times. Soon we watched her tie a line around the aft trailer frame, and then secure it to the pilings on the dock alongside the ramp--to prevent the trailer from being swept off the ramp. The current was over one knot. On the other hand, a similar steel trailer would have weighed over 1000 lbs more on the road. We avoid ramps with high currents!
 
Back
Top