Always learning

V1rowT8

Member
exMember
Joined
Jan 5, 2005
RO Number
16009
Messages
132
We went to get fuel the other day, and while docked "side-to" at the marina, a 36 SeaRay docks in front of us for fuel. Due to the length of the fuel dock, we were pretty close. Nice folks, we talked with them briefly.

After fueling, we're about to go, and I told the dock hand what I wanted him to do. We're in a narrow fairway, with the SeaRay in front of us, and about 30' off to the side, is a mega yacht. I told the dock hand to leave the stern line on, and toss the bow line up onto the deck to my wife. Thereafter, I was going to maneuver the bow out past the SeaRay, then let the stern go, and motor out.

I explained all this to the dock hand, and asked if he understood, and if he had any questions. He answered, yes he understood, and no, he had no questions.

Well, I start the port engine, and the next thing I know, we're loose, and floating towards the SeaRay, and slightly away from the dock.

Just when I was about to blow a gasket, the Starboard engine wouldn't start. Turned the key, nothing. Meanwhile, a small boat is coming up from behind us, which I didn't even see, as I had my hands full being on one engine, and out of position to get underway.

Well all of a sudden, the SeaRay and the small boat have all hands on deck, trying to fend us off.

In the end, I motored out of the marina and dealt with the engine which wouldn't start out in the open river, as opposed to around a lot of boats in a tight space while loose.

I had a neutral safety switch anomaly I suppose, at the least desirable time. I moved the starboard shift lever in and out of gear a couple times, and the engine started right up.

Needless to say, I was steamed. From now on, I will always end such conversations with a dock hand by saying, "don't cut me loose, until I say I am ready". Obviously, the conversation I had with him was not enough.

Moral of the story....don't count on anybody to do what they are told. It's always interesting, and there's always something new to learn.
 
That is why I would rather handle everything myself, including the lines. That deck hand should have never let your boat loose without both engines running smoothly! I guess he was in a hurry to clear the dock for the other boaters.....idiot!
 
"Moral of the story....don't count on anybody to do what they are told."

True.

My "cure", however, it to never let a dockhand touch my docking lines. I run the line from the boat attachment point, to and around the piling or cleat, then back to the boat. This allows easy control from the boat.

Dockhands, even those who are well intentioned, are not usually considered "able-seamen" and it is generally wise to limit the amount of responsibility designated. This is esp. true at the fuel dock, where they get distracted, hear an engine, assume you are ready and cast you off, then jump off to their next task.
 
The only person you should have "blown a gasket" at, or be "steamed" at is yourself.
 
Again I agree with Liz... Handle your own lines; only then do you have control.

At least I only have ONE engine to worry about. If it starts I'm ready to go, if it doesn't, I'm NOT (no halfway measures here)!!!
 
Hey In the know,

I agree. That's the reason for the thread title. But the dock hand was still a bone head.

This is the first time we have gotten burned. Regardless, from now on, we do it different.
 
"This is the first time we have gotten burned." -- V1rowT8

Note that we all changed our procedures because of an event similar to yours...

My first thought ( and I suspect this is true of most people ) was, "hey, this guy is around boats all day, every day, surely he can handle lines and simple commands.", when, in practice, the opposite is true: most dockhands do not know how to tie their shoe, much less tie up a boat. I do not think that they are "casting you to the wolves" on purpose, they just do not know better and do not care enough to learn more. But, uh, don't forget to tip them... Best practice seems to be to maintain control yourself ( or at least, with your own crew ) at all times.
 
Similar thing happened to me. I still want the help of the kid at the gas dock but I am very specific and only give him one step at a time. Usually I tell him to just get the line atached to the bow, but don't do anything until I tell you to. A nice tip also seams to help them focus on my needs verses the yourg lady walking up the dock...
 
Your engines should be started and running way before you start to think about giving instructions about untying lines.
 
The dock boy's boss may have instructed him to clear finished boats from the dock as fast as possible if other boats need fuel! Of course, he'll follow the boss' instructions if different from yours. Just keep him out of the equation. I'll let the dock boy assist when I come in, but not when I leave.
 
Back
Top