By no means is the following a "rule", but usually the advice is to have:
Anchor, then a length of chain equal in length to one-half your boat length to one boat length, then nylon line from there onward. For smaller boats, this seems to usually produce reasonable results ( and I therefore consider it a "rule of thumb" ). In any event, it is a good starting point. For certain types of vessels and/or certain areas, this is not necessarily a good setup.
Every vessel has varying requirements, dependant upon the boat length, type, weight, shape, the types of seas and bottoms encountered and the "sleep limit" of the Captain. There are often other requirements that might need to be addressed. ( incl. the "Sleep Limit" of the spouse/partner. ) Because of the unique nature of each situation, I would expect that your results will vary to some extent from everyone else's here. So try several methods before settling on one primary method. Note that many experienced boaters carry a second ( or third, etc ) complete anchor and rode as a spare or for when conditions vary from the "norm".
--
boathandler, yes, it is likely that the type of rode affects the holding power of any anchor. But it is likely that any improvement in performance would equally useful to most anchor types. ie: Having a good rode is a good idea, whichever anchor you choose. It is also likely true that the type of anchor affects the holding power of the anchoring system regardless the type of rode. The key is getting both a good rode and the most appropriate anchor for the most common situations ( or, for paranoids like me, for the most severe conditions that might occur. )