Anchor Rode

dritter

Member
exMember
Joined
Oct 18, 2005
RO Number
19332
Messages
216
I have a 32' st. tropez which weighs about 10,500#. Looking at anchor rode I am being told that 1/2 rode with 1/4 chain is big enough for my boat. That seems a little small to me. What do you think?
Duane
 
i have said it before...there really is no such anchor to big (with in reason). if you are trying to shove it threw a windlass then you are limited by that other wise i would always go bigger.

is that size big enought...probably for most recreational applications.

also more chain is alway better. i run 90' of chain
 
1/4" chain should be fine, especially if you go with a high test (G-4) chain. A good 1/2" 3-stranded nylon anchor line should be fine. If you want to upgrade the chain be sure your anchor windlass will handle the chain size. I use a boat length of 5/16 BBB (3B) but I don't have a chain windlass to worry about.
 
dritter:

I have 30' Commander weighing 12,000 lb. 2000 hrs of long distance cruising, from the South tip of Vancouver Island to Skagway, in 7 years with o/n anchorages about 75% of the time.

300' of 1/2" braided nylon rode, attached to the boat and the chain, 60' of high tensile 1/4" chain, attached to a 33 lb. Bruce, and the nylon. Add a well protected anchorage with a good holding bottom of "loon $hit" and it works for me.

If it weren't for the pee breaks I'd sleep right through every night.

Old_Salt
 
Duane:

Wiser beat me by 2 minutes. I move my lips when I type and it slows me down.

If he says it's O.K. ... you're good!

OS
 
I was looking at windlasses and the one I was looking at for my size of boat said it used 1/2 rode and 1/4 chain. I was going to goto the next one up that used a bigger rode, but I will go with the lewmar v700 and get the 1/2 inch rode.
Thanks for the replies!
Duane
 
You should definitely be okay with 1/4" chain and 1/2" rode. The only remaining questions would be how much of each.

I would suggest you consider 1/2" braided nylon versus three strand. It handles and packs much better than three strand. Plus,it gives you a little more stretch (better shock absorption).

You didn't mention anything about having a windlass in your post. If your considering one in the near future, look at what they suggest and buy accordingly.

Bob
 
quote:

Originally posted by BobV1

I would suggest you consider 1/2" braided nylon versus three strand. It handles and packs much better than three strand. Plus,it gives you a little more stretch (better shock absorption).

Bob





I disagree. Braided nylon is easier to handle for dock lines and braided cotton is even better. For quality nylon anchor lines: three-stranded line offers more stretch and shock absorption than braided.
 
The boat tech link provided by "mud runner" supports "yzer"'s statement.
 
That BoatUS link is interesting. I would add that the short link chains like BBB and high-test G4 were designed for more efficent use in a chain windlass. Proof coil chain has longer links.

I work with BBB by hand and can tell you that the short link chains are much easier to handle on deck than proof coil. Short link chain falls into a deck pipe more reliably and is less likely to kink than proof coil. The short link chains will form a neat, compact pile in your anchor locker that is less likely to tangle or knot when you are hauling out the rode.
 
I would suggest that you go to www.yalecordage.com and click on the Download Anchoring Technology White Paper.

I stand by my previous post that Nylon Brait handles easier and absorbs more energy that three strand nylon.

Bob
 
yser is right, 3 braid is better for anchor line and even for dock line. It has much more give then braided lines therefore reducing any shock.
 
my windlass recomends 8 plait rode. it is softer and lays better in anchor lockers. my bud has the same windlass with 3 strand twist and he gets jambs constantly. if it were me and i was buying a new windlass i would buy the recomended chain and rode from the manufacture. may cost a bit more but it is what it was designed for.
 
Gary
Apparently you did not go to the yale cordage web site and read the white paper on anchoring technology. If you did, you could not make the statement that three strand is better than brait.

This product is not your typical run of the mill nylon braid. It was designed for anchoring and as such does a better job than three strand.

Bob
 
Bob, 8-plait like the Yale Brait (among others) is a fine product so why didn't you call it that to begin with instead of describing it as braided nylon? Double braided anchor lines have been around for years and represent the vast majority of braided nylon anchor lines.

1/2" Yale Brait (8-plait nylon) will stretch 10% of it's length at 16% of it's average breaking strength of 6300 lbs.

1/2" Samson Pro-Set (3-strand nylon) will stretch 10% of it's length at 20% of it's average breaking strength of 6300 lbs.

At pulls of more than 20% of breaking strength Brait will offer significantly better shock absorption than Pro-Set or similar 3-strand nylon ropes. That's it's advantage in flexibilty.

Of couse, you will have to pay for that characteristic.

There are anchor lines that offer significantly higher breaking strengths than either of these anchor lines, but that's another story.
 
Yzer

Your right! I should have been more specific in my original post and referred to either 8-plait or yale brait versus nylon braid. That would have eliminated any confusion as to what type of rode I was referring to.

Bob
 
Back
Top