Bayliner?

Monterey10,what is your BLBA #? Ill compare it to the one I get back from the one im buying.And we can discuss more on the specs in detail
 
Im trying to find out the exact information on it and repaint it and build it to its exact condition again
 
Vern, I believe the 21'er would be fine with a 150 to 200 hp engine. I think the 23'er will need the 225. You wont notice the extra weight of the 4 stroke engine because the boat floats high in the stern any way. The last 3 digits of my HID are 86, making it an 86. The number doesn't reference the length.

Having read countless articles on mid 80s boats, you need to be very careful. Check the following:
1) Transom, stringer or deck rot.
2) Fuel tank leaks.
3) Engine shot.
4) Bad Hatches or windows.
5) Loose hard top.
6) Bad electrical (THis is critical)

Any of the above will set you back a long time.
Things like electrical can cost thousands to replace. Please take a look at the other 21 and 23' Trophies on the market, all of them less than the cost of a Honda 225.

You might offer them $1000, if it's sound.

The following picture shows my 21'er floating high with a OMC/GM 5.0 and two batteries aboard.

Doesn_t_float_too_low2_sized.sized.jpg


Even simple things like hoses can be bad:

Repower_016.sized.jpg


I have a link to my photo album, showing all the gory details of my repower. It took approximately 35 days of hard work.

http://www.baylinerownersclub.org/gallery/album480
 
Its an outboard transom,not an I/O. I plan on re-doing the transom anyways,just to be on the safe side.I already payed for it.So just trying to find as much info on it,to paint it and bring it back to its original condition
 
OK, best of luck. I find that I really hate life rebuilding these older boats, but when I'm done, I enjoy them more than most any (factory) boat I've owned. Feel free to write me any time if you have questions. Actually, the Trophy was far easier than the Bigger boat in picture to the left, I had to do sanitation lines, heads, refrigeration, hot water heaters, upholstery, electrical, etc etc etc.

Craig
 
Monterey10.......Here s the BLBA #,I done a search online,and it found nothng for it.Do I need to write more then the number?

BLBA 63FE1283-4 This is on the back right hand side of the transom,So its a 1983? It dont show the length in the number?
 
It looks to be an 83. I didn't think they made that hull back in 83.(?) Measure the boat, you'll know the length.
The serial number isn't that important as: getting rid of the old fuel, checking the tank for leaks, see how much of the
electrical is working, whether the stringers and transom are good.
 
Back
Top