best bilge pump?

ccstone

Member
Joined
Aug 25, 2008
RO Number
30676
Messages
12
Iam shopping for a new bilge pump. Any advice on who makes the best pumps. Its going in a 32'.
 
I use Rule pumps. You need more than 1. I have 2 of the 2000 GPH and a 1500 GPH on a 24 ft boat.

Ken
 
The best bilge pump is a panicked man with a 5 gallon bucket in his hands.

I have always owned Rule pumps and have never had a problem. I also hope you are putting more than one pump in a 32' boat.
 
Ditto ITK.

Whatever pump you use you need at least two... AND a separate alarm on it's own power supply.
 
on a 32 footer, you need 2 rule 2000 (one for the forward bilge and one for the engine bay) plus a 3700 back up in the engine bay, mounted higher as a back up.

Rule rules in my book...
 
Ive got one in the forward bilge and one in the aft bilge. I will now put a second in the aft. I was thinking a 1500 and 2000 as the second, because the 1500 draws 9 amps compared to the 2000 at 15 amps, but the 2000 and 3700 would be a better idea, not a area i want to go light on.
 
dont' forget the rating is at maximum voltage with 0 head... in the real world, they pump 20 to 30% less than advertised...

teh 3700 is really the emmergency back up, it shoudlnt' come on unless you need it. chances are the engines will be running or the boat will be on shore power so amp isnt' an issue.
 
The pump is going to be as effective as the switch. The best switches are the Ultras, and you'll pay almost as much as the pump itself for one. I was having all sorts of problems with various Rule switches in a particular installation, and switching to the Ultra solved them all.

Adding a backup as Pascal prescribes is a good idea and on my "to do" list. On my Hatt, a couple of the shower sumps are positioned so they could play that role. Pascal, where do you have yours mounted on your 53? We're stationary for a few months and a local guy has the 32v Rules on sale in various sizes, now would be a good time for me to do it

George
"Incentive" Hatteras 56MY
currently docked in Hollywood, FL.
 
the "problem" with the 53 is that there are multiple bilges which are not interconnected (unless water gets quite high!) since we dont' have centerline bilge between the engines. I put a 3700 under the genny room, to back up the 2000 that's in that bilge. I figured that if something happened in the engine room, water would flow into the genny bilge thru some of the holes in the bulkhead. Ideally i should add another 3700 at the stern, to back up the 2000 aft pump...
 
Thanks for the advice guys. I just bought a 33' Chris-Craft Commander 332 and it only has 2 500gph pumps. I thought these would be enough but looks like I need to upgrade. On an older boat I had the end cap of a heat exchanger came off. Almost sank the boat. Amzing how much water a raw water pump puts out.
 
I second the use of the Ultra Switch switches. And don't forget to install a self powered high water alarm. Very cheap insurance.

"Amzing how much water a raw water pump puts out."

With a T valve, a hose strainer, fittings, some hose and a few clamps you can turn your engine/s raw water pump/s into nifty crash pumps.
 
I run 3 Rule 2000s and a 3700 high water back-up. No problems and I have a dry boat for the most part. Test them every time I go to the boat and I make sure the switches are free. My 800gph in my shower sump could be put into service if needed but I would have way more water in the bilge than I would ever want to have at that point. I carry a few buckets and a hand pump for manual water removal. Bill
 
I put a Johnson 2200 in last night. After spending an hour sitting on the floor of West Marine I came to the conclusion that the quality of the Johnson seemed better than the Rule 2000, hopefully I made the right decision, because my neck is sore this morning from the 48 different Yoga positions it took to get it in. I will use the Rule 3700 as the back up.
 
Back
Top