Bimini Replacement

jrpar

Member
Member
Joined
Apr 1, 2003
RO Number
11343
Messages
374
Getting ready to replace the entire enclosure on my 30' express. Given the materials selected would be premium supplies (Sunbrella, YKK/Riri, 40g strataglass, etc). This would be for the top (4 bow), windshield (3 pane walkthru), 2 side curtains, and a rear panel.

What would one expect the costs to be and any advice on "must haves" in the contract.
 
your best chance for sucess is to use a local maker that has done some good jobs on other boats in your area.
 
I cant add anything to your question about the cloth material, but on the Tubing, I have an experiece.
I have two trips out of Biloxi into the gulf. Both returns were in rough water.
Some pretty heavy guys were hanging onto those Stainless struts holding up the guy's Bimini top.

Before that first trip, I had an idea of building a Bimini top out of Aluminum tubing.
But during that first trip when I saw how much weight might be put on those struts I decied the good thick stainless stuff is a much better deal.
 
Concur with heavy stainless. Costs more for sure but it will likely last 4 x the life of AL.
 
From shop to shop prices can vary id gueese your looking at 2500 to 4000 depending on where you go.
 
My 17 yr old aluminum frame has never broken. One of the nylon fittings broke, but that was easily replaced. The frame got tangled with a mast protruding from a sailboat......
 
Some of the things to look for are: does he use at least a UV resistant polyether thread such as Dabond and what weight thread...at least V92, BTW Tenara thread has a lifetime warranty, but usually very expensive and not worth it. Look at how the isenglass is attached to the sunbrella...should be some extra reinforcement on the inside. Check how he reinforces edge areas that have snaps..should be reinforced with more sunbrella and some webbing. YKK or RIRI zippers are best. Sunbrella doesn't take chaffing well, so areas of the rear panel like the corners should be reinforced with some vinyl patch on the inside to prevent the sunbrella from wearing through. 40 gage strataglass is great, but it will not roll up very well so be aware it can be a storage hassel.
 
Many people roll up their isinglass panels and get underway. The isinglass will scratch and soon not be very clear if you do that. If you want them open while underway, take them off and stow them flat down below.
 
"From shop to shop prices can vary id gueese your looking at 2500 to 4000 depending on where you go."

Lots of Luck with that. Mike....How do you stay in business? Or is it just up here in the north country that things seem way overpriced? Sounds like he's having the same job done that I just had done and I couldn't find anybody around here for less than twice that amount.
 
quote:

Originally posted by Tanqueray

"From shop to shop prices can vary id gueese your looking at 2500 to 4000 depending on where you go."

Lots of Luck with that. Mike....How do you stay in business? Or is it just up here in the north country that things seem way overpriced? Sounds like he's having the same job done that I just had done and I couldn't find anybody around here for less than twice that amount.




Yea Tanq had the high quality custom job is why his cost so much. There are not very many boats on the water with an enclosure like his.
 
LMAO......THAT's for sure.
Seriously though.....All the places I contacted weren't even anywhere CLOSE to those figures. Double that was where evrybody started.
 
Dern nearsightedness! thought that said "Bikini replacement"...
 
quote:

Originally posted by Tanqueray

LMAO......THAT's for sure.
Seriously though.....All the places I contacted weren't even anywhere CLOSE to those figures. Double that was where evrybody started.





Same thing here like Tampa Ft Myers, me im just in a sleepy little town :)
 
Back
Top