boat foam

BoatCrazy

Active member
Member
Joined
Sep 25, 2008
RO Number
30843
Messages
2,332
I currently have the floor ripped out of my boat and its totally bare except for the stringers.

Do I need to put foam back into the boat?? The boat only stays in the water for 2 weeks at a time?

If I have to put foam in, what foam can I use that wont get water logged??
 
you can buy flotation foam in form of a two part liquid which you pour (quickly) after mixing. It is closed cell foam which will not absorb water.
 
Pascal, any idea what that costs? I have to fill an 18ft boat?
 
The foam was placed there for a reason: to provide adequate flotation in the event that the boat takes on water. If you remove, and do not replace the foam, then IF your boat takes on water it might sink vs flood, but remain near the surface ( this is a big deal, actually. You really want the boat to stay on the surface ).

SO, yes, you do need to put the foam back in. THe length of time the boat stays in the water is not relevant to the question. If the boat is in the water ( for whatever length of time ) you want it to function properly. One of those functions is to stay near the surface, even if filled with water and people. Every time, all of the time.

----------

The two-part pourable foam available at marine stores is a good product to use to replace the removed foam. Definitely read the instructions carefully and follow them exactly. It is not hard to work with, as long as you follow the directions. It gets complicated if you do not. ( The stuff is a bit pricey, however ). It also forms a closed cell foam structure that is resistant to saturation and/or waterlogging. ( Unless you shape it with a knife or tool... )
 
BoatCrazy, the link provided by PascalG also has a price list. It indicates that it will cost about $10 cu ft or less.

Since you will want to calculate the required volume to be filled before ordering anyway, calculating the cost should be easy: $10 /cu ft
 
quote:

Originally posted by BoatCrazy

Pascal, any idea what that costs? I have to fill an 18ft boat?






the price is right on the page i posted the link to! $62 for 8 cu ft, which i would guess is enough for a 21 footer although you shoudl measure and see if you dont' need a second kit.

it's not hard to do BUT the key is to mix it quickly and to pour it as fast as possible. It starts foaming and expending within a minute or so.
 
sorry, i posted my post before I read that you posted a 2nd one.

Thanks for the info.
 
i've bought foam from uscomposites dot com before. you might compare prices. i believe the 2lb is recommended for non-strucutural applications.

it is very nasty, stickier than he!!. cover anything you might drip on (trailer, hull), wear old clothes/gloves, etc.

the expansion rate varies greatly depending on the outside temp. areas poured in the shade expanded about 1/3 less than those poured in full sunlight for me.

if your deck is still out, think about your drainage before you cover everything back up. do you have any limber holes?

last thought, flotation foam will stick to anything it touches and seal up whatever drainage you might have planned. an alternative is to use plastic liners (unopened trash bags) and line each compartment you're going to fill with foam. pour the foam into the lining and peel it off after the foam cures, about 20 mins depending on temps again. the foam will become a block and will allow water to escape via limber holes to your bilge.
 
I used about a gallon of the stuff this summer while doing my floor. Pascal is right about time; mix equal amounts, stir for 30 seconds then you have 30-45 seconds of working time. I poured it into voids and around structural components. Anything it touches or lands on it sticks to and GROWS.
 
Completely dry and seal all wood with epoxy. Foam is the biggest reason for water getting to and rotting wood.
 
you can refrigerate the A and B part and mix cold. that will give you a few more seconds working time.
 
I did some research online and found another idea for flotation foam..

Im not saying I am going to do it but its a thought. Buying a bunch of water noodles, and stuffing them in between the stringers...Would that work?

Sounds kinda silly but I think its crazy enough to work...
 
quote:

Originally posted by BoatCrazy

I did some research online and found another idea for flotation foam..

Im not saying I am going to do it but its a thought. Buying a bunch of water noodles, and stuffing them in between the stringers...Would that work?

Sounds kinda silly but I think its crazy enough to work...





Likely would, but the 2 part pour in adds to the structural stability also.
 
How much structural stability does the pour in add?

I would cram the noodles in there..

Only problem I see with the pour is, is if it expands over my stringers, Ill have to trim the foam, which would mean opening it up and making it no longer water tight. I would then have to add apoxy or something like that to seal it up to re water tight it...I dont know if I want to go the route and take the chance of it not sealing properly...
 
In all likelihood you'll have to trim it after a pour. Don't worry, it's closed cell foam and it won't absorb water. Just toss the cutoffs into the next cavity. I've also seen guys put in empty plastic pop bottles to cut down on the amount of foam they need. Once it's covered with a deck you'll be the only one who knows! I suppose it's ok for filling up a non structural application.
 
When I tore the floor out of the boat, (original floor), there was only a couple of pieces of foam in the bilge. Nothing that would provide structural stability..My bilge is broken up into 4 cavities (between the stringers), and there were only 2 pieces of foam in each cavity. Each piece of foam is 3' long, by 2'' wide...

that doesnt seem like it would provide structural stability....
 
ytou dont' want to refrigerate the parts, the more heat, the more expansion you get.

you could use noodles although they're not that cheap if you compare equal volumes.

it's not about "structural stability" whatever that is, it's about floatation. the foam is not strutural, if provides flotataion if the boat swamps. The only stability issue is where the foam is located so that the swamped boat remains stable... you want the floatation to be symetrical (side to side AND fore and aft)
 
someone on this thread mentioned structural stability..i didnt think that foam would add any..

Im not looking to cheap out at all, but I think I might like the idea of noodles better only because of the mess and no expansion...
 
Depending on how the boat was built it could be both for flotation and structural reasons...this was the case with my '88 Four Winns...I had to replace most of the deck and have stringers repaired...so I ripped out all the foam from in front of helm seats to back to the motor...I had the stringers done...then I e-mailed 4 Winns and asked them if the foam was also structural and they said that it was...so it had to be replaced...and I did it on a nice 75 degree in Oct 06...the stuff really expands so I did it before installing the deck...then just cut off the excess even with the tops of the stringers...and then put down the new deck panels...I can tell you that after trial fitting the deck pieces without the foam..vs having the foam in...the foam makes it feel much more solid...and I've used the boat for the 3 seasons after that and it's very solid out on the water...so if I was redoing a boat that had foam I'd replace it but do as Charlie said and seal all wood with epoxy which is more waterproof than polyester resin....
 
Back
Top