Bottom Paint

wiseguy

Member
exMember
Joined
Dec 11, 2005
RO Number
19739
Messages
71
Is Interlux Micron 66 really worth the high price
will it last longer and do a better job than Trinidad SR.
 
Is the Micron 66 a multiseason ablative and the Trinidad a single season hard epoxy paint?
 
Exactly... Two totally different products..(Note: Micron is recommended for only salt water as well)
 
Trinidad SR is doable in Tampa Bay for two seasons.

The SR is for 'slim reduction'.

I don't think I'll pay the extra next time.

El Sea
 
best thing to do is go the mfg website for each product and read about their individual products and specifications.

on a slightly related note i did learn something important this spring about bottom paint. for Trinidad's ableative paint, it must be in the water within 24 hours of painting and cannot come out of the water for more than 24 hours without recoating. the paint hardens up and looses its ability to function correctly.
 
A lot of ablative bottom paints work that way. I've splashed theboat a couple of hours after putting on Interlux Bottomkote.

Always read the directions before using any paint.
 
that little jewel is not on the can, but the rep from the paint mfg shared it with me. i suspect it is true for more than just his brand.
 
When I used to bottom paint my boat, it was done with Interlux ablative. I have had my boat out of the water for up to 1 month without the bottom paint losing its effectiveness. It is kept in brackish fresh water......
 
I applied two coats of micron 66 two years ago and even though it cost more so do haul outs. Just pulled the boat and no growth on the bottom. I've just had a diver change the zincs last year and clean the props.

Even though it cost more initially, it saved money by not having to haul and paint every year.

Dave
 
Wiseguy, the answer depends on if you want ablative paint or hard epoxy paint. Mult-season or single season protection.
 
We use Micron also. Great paint, in our opinion. After 2 years, the only place we can see
any kind of slime problem is at the water line. The bottom looked great.
I have had my boat out of the water for 2 weeks after the bottom was painted also, with
no problems.
My biggest problem is barnacles on the shafts and under the trim tabs. We painted the tabs,
but the paint won't stay on for more than a year or so. It stays on on the top, but not on
the bottom of the tabs.
There is a new Bertram in the boatyard that is getting prepped to use some kind of stuff
for the shafts and props that costs around $400/quart to keep barnacles off.
I think we will stick with the scraper every 2 years. If you scrape right away, they are
no problem.
 
how effective and long lived your paint is has more to do with where the boat is stored. in very warm salt water with little circulation the speed that things grow at is amazing. for us living in the deep south good paint with proper application is key and even that will not last a season without regular cleaning to remove the growth and expose new/fresh paint. i grew up in the N/E and when i heard about people using divers down here for cleaning i thought they must be idiots why not use bottom paint............lol. now i'm one of em and but for the cleaning my bottom would be covered in growth well before the end of the year. running the boat at speed helps keep it clean with fresh paint, but as the paint wears out you have to clean it down here.
 
quote:

Originally posted by vic33004

best thing to do is go the mfg website for each product and read about their individual products and specifications.

on a slightly related note i did learn something important this spring about bottom paint. for Trinidad's ableative paint, it must be in the water within 24 hours of painting and cannot come out of the water for more than 24 hours without recoating. the paint hardens up and looses its ability to function correctly.






That's very true about the websites. As far as leaving the boat out of the water, this is OK with some paints, not OK with others. That's where the websit info comes in handy.
 
I am fortunate enough to boat within an hour's run to get the boat in salt water. A half hour or so of running on plane in salt water does a great job of cleaning the bottom, waterline and transom of the slime and such which flourishes in warm brackish water.

By the time I'm back into the slip, I've run enough fresh water to have slushed the salt out of the RWC system.
 
Back
Top