Bottom Painting.

rommer

Active member
Member
Joined
Oct 5, 2003
RO Number
12280
Messages
6,037
We are being pulled out next week for some work on the boat. It is being pulled on a Monday and scheduled to go back in the water on Friday.

Since we now winter in the water I was wondering if there is enough time to do a bottom painting while she is on the hard.

We have used 2 coats of ablative each of the previous 2 years that she was out and I would continue to use ablative.

The question is, how long should the bottom dry before painting?

TIA
 
Overnight is plenty of time between coats .... often, depending on weather 2 coats can be applied the same day.
 
Pete

What I'm asking is how long should the bottom dry before the first coat? Boat has been in the water for the past 15 months.
 
I have done 2 coats the same day and have had no problems, that is plenty of time to get it done.
 
I winter in too.......... and Im coming out this week also......but only for 24 hours.( unless we find a problem and need parts )

In that time I power wash......clean all the intakes.....re-zinc.....bottom paint....and wax below the rail.....and resplash.

John...... What work are you having done ?
......but I think a week on the hard should be plenty of time to do what you want.
 
Taking the plunge and going over to the darkside Don.

I don't want to say it too loud and incur the wrath of the purist gods ;)

Adding a Vetus bow95 bow thruster
 
Less than 48 hours from haul to splash is not uncommon. Just be sure that the pressure washing is done ASAP on haulout for maximum possible bottom dry out time.
 
NICE.....................

if you need any " training "..... I hear Walter is highly qualified !!!
 
I never did call him back so he's probably mad at me anyway. Then again I hear having him mad at you is a good thing! Keeps him away from my dog or something. ;)
 
If you paint on a coat Wednesday you should be fine, hull should be dry.

Are you doing one or 2 coats this time around?

Jonathan
 
Much of the world's boats are painted on a "Grid" This is a section of wooden cross beams to support the keel, and pilings for the boat to lean against as the tide goes out. The boat is put on the grid, the tide goes out, the bottom is scrubbed/pressure washed. During the next tide cycle the bottom paint is applied and the boat floated at the next high tide--24 hours later!
 
Back
Top