Bravo 2 props

Shore

Member
Joined
Apr 15, 2003
RO Number
11418
Messages
598
I need a 18616-a40-p21.That number with a 48 prefix (as in 48-18616-A40-P21)comes up as a 17-3/4 x 21p 3-blade but my measurements on my prop are more like 16-3/4.I wonder if it has literally worn down that much?
 
Shouldn't have shrunk by an inch.. How are you measuring?
Across the wheel (full dia) or from the blade tip to center and multiplying by 2...
 
Someone may have cut it down. That's a pretty standard prop.
 
Since it's a 3-blade, measuring across the wheel isn't the most accurate. Try the other method & see what you come up with for a measurement.

I run the 17.75 diameter on mine. If I recall, there is room for an 18.25 to spin, so I'm wondering why someone would cut it down.
It could be a reworked prop and the shop only smoothed out the edge damage. Either way, the 17.75 x 21 is a standard size and should be stocked by BF (they had the best pricing as well last time I bought a pair).

John
 
Suggest you consider the PowerTech line of SS props. I put a 17.5" SS 3-blade on my boat and it made a tremendous difference. They also offer 4 and 5 blade versions up to 18.5".
 
I have a Bravo II prop leftover from the 30' Sundancer we had a few years back. Let me get the numbers off of it this weekend and see if it is what you need.

It was a pretty standard size for a 30', single engine boat (454 engine). IIRC it was a 21.
 
That would be great Gary Martin thx.

BTW, my prop is also missing the blow-out ring on the back.It got some crab line wrapped around it and popped it right off.Where we boat we do run through a good bit of shallow and it is sand.The edges get worn pretty good.
 
Back
Top