Chain length marking

pdecat

Well-known member
Member
Joined
Jan 1, 2000
RO Number
842
Messages
11,588
The paint marks on our anchor chain comes off quickly. What do folks find that works well on chain to mark length?
 
Wire around the appropriate link, and paint the chain as above. However the "big boys" do it in "shots" of 15 fathoms (90ft). For a small boat you might want to use a shorter measure. LtBrett's suggestion of every 30' makes sense.
 
I've weaved colored line in between the links. Lasts a very long time and is easy to see. I use red, white then blue every 50ft.. Whether painted links or using colored line.
 
I thought the "big boys" used the Bos'n mates to take care of that.
 
I did different colors of electrical tape with wire ties around those links to hold the tape on. That was 3 years ago and many, many nights on the hook.
 
I use colored electrical tape. You can buy it in a packs of 5 different colors. I wrapped a different color around one side of a link at 15 foot intervals and after 75 feet use 2 different color combos. When I wrap the tape I leave a 1-1/2 inch extra folded sticky side to sticky side like a flag. It lasts for years.
 
quote:

Originally posted by KiDa

I thought the "big boys" used the Bos'n mates to take care of that.






That's about the size of it... but I can't afford a bosn's mate so I have to do it myself. Same rules apply though.
 
not sure that wire would go through the gypsy. The colored rope is a new idea though I am surprised it stays in place. I imagine that you use a size that just fits in the links and is a couple of feet long.
 
Small zip ties every 20'. They don't chip & last a very long time. 2 for 20, 3 for 30 etc.
 
The Brits sell these for metric chain, not sure if they are available for North American chain sizes.

3234.jpg
 
Damn thats nice chain.... I dont think i have a uniform link in the entire rode.

Rob

PS i use colored rope as well .
 
There is a magnet that is built into the windlass, that feeds to a digital display on the dash. So as I let out chain, my little counters let's me know how much actual chain I have out...it is exact and never fades away.
 
quote:

Originally posted by The Other Gary

The Brits sell these for metric chain, not sure if they are available for North American chain sizes.

3234.jpg


Do a google search for "anchor chain markers". These are available for various size chain.




 
Put the sections of chain in a box and spray paint the colors you want to see, simple easy solution, can even do it on the front deck of the boat if need be.
 
I use plastic cable ties.......works great, been on 5 years, no issues.....put one every 5 feet....
 
Colors painted on an anchor chain to indicate depth usually don't last very long. Cloth or ribbon markers tied to chain are often torn off when passing over the wildcat or tumbling into the chain locker. Twin or leather markers are very difficult to see at night and may also be easily dislodged. For an easily applied, long-lasting, visible solution, I bought 2 feet each of 1/4-inch yellow, blue, red, green and white polypropylene rope. I unlayed the strands, then melt-whipped the ends. To mark my chain, I simply wove the polypropylene in and out of the links. The markings are highly visible as well as being felt by hand. After several years of service, the markers continue to travel smoothly over the chain gypsy.

Cor
 
Back
Top