cleaning running gear

Rotary sander/polisher with a sanding/grinding pad on it. Start with 60 or 80 grit and work your way up. But if your going to paint your shafts and props I wouldn't go any finer than the 80 grit.
 
Passingthru, I use 50/50 muriatic acid & water. Let set & use 3M pad and/or wire brush on drill. I have never painted any of my running gear with bottom paint. Everything still looks like it was just put on....trim tabs, rudders, struts & props. Been meaning to take pix of same for years. Will try before splash down !
 
For the big stuff use a scraper like a cut piece of leaf spring sharpened like a chisel then a wire brush on a grinder makes quick work of barnacles & coral growth on underwater gear. Muriatic acid deals with what the grinder can't get.
 
best I have found is a high speed drill with a wire wheel
 
angle grinder with a knotted wire wheel. Just don't drop it in your crouch with the trigger lock on...
 
Back
Top