cleaning scum

celliott

Member
Joined
Jul 16, 2007
RO Number
27484
Messages
5
i just took my crownline out of the water for the winter. Fresh lake boat. Is there any home cleaners i can use to clean the scum from the bottom of the hull.
 
Starbrite hull cleaner...Follow the directions on the bottle...
 
The sooner you get it off, the easier to remove. I usually clean mine within an hour of it hitting the trailer!
 
I haven't yet, but there is always a first time! Weiner, are you now becoming a "smart A$$" with your new avatar?????
 
I would get pool shock, from a swimming pool suply store, and wash it with that, use gloves.
 
Slimy Grimy is what lots of people use here, powder form you mix with water. A friend gave me a great tip of using a bug/chemical sprayer for it. It works quite well. Another product at West Marine called On/off is stronger, and needs to be applied full strength, so bug sprayer is not a great option for it.
The scum from lakes is mean stuff, both products use an acid chemical. Without it, it is nearly impossible to get off without a power washer before it dries.
I did mine on Monday right at the boat launch with the bug sprayer with great results. About 5 weeks ago I had pulled it out and spent 5 hours on it with slimy grimy, a regular hand pump cleaning products type sprayer, and scotch brite, the day after it was home. So it had only 5 weeks buildup, but spent only about 40 minutes and it looks great.
James
 
Mary Kate On and Off.

Works extremely well and goes a long way. Removes all manner of bottom gunk and stains without scrubbing. Brush it on and hose off. They also have a new gel version that sticks in place.
 
I use Sno-Bol toilet bowl cleaner. I put it on full strength with a scrub brush and it works well.

Another product I've used in the past is Zing. This has acid (hydrochloric I think) in it and it does a good job but you have to make sure you don't breath the stuff in because it will take your breath.
 
Is a power washer a safe option or will it eventually cause damage to the gel coat? This is assuming a boat with no bottom paint.
 
Power washer is OK, so long as you don't get the tip right up to the gel coat or use a pencil tip. Use it just to knock off the crud, not to make the hull super clean. You want to use a chemical cleaner and/or scrub brush for that.
 
I immediately power wash the entire hull below the rubrail and the outdrive. Then I apply hull cleaner. Then I thoroughly power wash off the hull cleaner.

I didn't know about Mary Kate On & Off in gel! I'll have to try that one next time.

If your hull is regularly waxed/polished, it cleans up much better.
 
quote:

Originally posted by lark

Is a power washer a safe option or will it eventually cause damage to the gel coat? This is assuming a boat with no bottom paint.






If used correctly, it is safe. It won't get the scum off, though.

And if you have an I/O, don't use the power washer around the bellows. It can easily put a hole in them.
 
quote:

Originally posted by b_arrington

Mary Kate On and Off.

Works extremely well and goes a long way. Removes all manner of bottom gunk and stains without scrubbing. Brush it on and hose off. They also have a new gel version that sticks in place.






Yeah, that. AKA bottom acid. Just be advised, that stuff can HURT YOU BADLY. Use splash goggles and gloves. Make sure the trailer is wet, and hose off any that drips on it right away. (Will leave black spots.)
 
Remember to use the less agressive stuff first. Sure, you can use strong acids and even strong bleaches, but do expect to take some of the life out of the gel coat, especially the bleaches. It was not specified I don't believe, but on/off works great on bottom paint. If you are pressure washing bottom paint, depending upon the type, expect to get to repaint. (We really need to ask enough questions to answer the post, but then again as a group we'll just get criticized by the newbies for being hostile for wanting to know what the real problem is before answering it shotgun style).

For gel coat I start with your basic oxalyic acid in gel formation cleaners (FSR, MaryKate has one and many others). Next I might try the harsher acidic cleaners such as on/off (which works fantastic on bottom paint scum line). If were talking new/shiny gel, I don't hit it with bleach, ever. For chalky stuff, sure, why not, especially nonskid. Even break out the comet, soft scrub and other good cleaners in those cases.

Don't get the harsh acidic cleaners around graphics or paint stripes, they will be gone.

Easy then tough, don't pull out the big guns until you need them. Start with the easy stuff like FSR, it works on most stuff and as mentioned elsewhere do it when everything has yet to dry and it usually comes right off. Once it dries, you feel like you need a grinder.
 
quote:

Originally posted by Ghost

Remember to use the less agressive stuff first. ............




That's good advice for any cleaning problem.

As for bleach, when I first tried to tackle a scum problem years ago, I tried soap, detergent, rubbing compound, and bleach. Nothing touched it. Then I asked on a web forum and someone suggested Starbrite Hull Cleaner. I was amazed how well and easily this worked. There are other products on the market with the same ingredient (oxalic acid) that work as well.

Look on the container to make sure it's labelled as safe for fiberglass.

I don't use toilet bowl cleaner on my fiberglass hull and I don't use hull cleaner on my toilet. ;)
 
I used this a while back on my previous boat that had a chalk build up. I tried color restorers, cleaners ect. but nothing worked. This stuff worked great: Algae Strip by Aurora (www.auroramarine.com) and follow directions. They have allot of other items I have tried yet. Good Luck, Doug
 
I don't use toilet bowl cleaner on boats, either, but you can BET I use bottom acid (MK On/Off) on my bathtub and toilets. Haven't scrubbed a toilet or tub in 12 years...
 
Back
Top