Clear Vinyl

ras737

Member
Joined
Apr 28, 2002
RO Number
8373
Messages
30
Whats the difference between Eisenglass and Strataglass? How can I tell which one I have on my 2004 340 Searay Sundancer?
 
First off, there is no Eisenglass. It's just a generic term like Kleenex etc. for DP (double polished) clear vinyl. Was in the vinyl (PVC) industry for 23 years. The only difference between Eisenglass (DP Clear)& Strataglass is that Strataglass has a coating to reduce scratching to the DP clear vinyl. C/B difficult to tell. If you can feel a sltly oily film on surface; it most likely is Strataglass
 
Thanks for the info Bob. I replacing some of the vinyl panels and want good quality. Any suggestions?
 
It is all personal preference and cost.

40 ga Strataglass is pressed and polished. It is made by taking two 20ga and pressing them together to make 40ga.

There is also 30ga Strataglass. It too is pressed and polished.

Both are scratch resistance.
 
I asked the same question last week directly to the company that makes Strataglass. Their response is below:

Original Message-----
From: Edison [mailto:edisonrb2@gr5tstrataglass.com]
Sent: Monday, March 23, 2009 8:45 AM
To: Al Baris
Subject: RE: Strataglass, Inc.: Strataglass????

Al- take your fingernail and rub the vinyl in a tight little circle if it
scratches, it isnt strata....what kind/year is the boat?????
 
Do you need the material to be flexible enough to roll up? If not, take a look at (through) EZ2CY. Tremendous optics, but very stiff and cannot be rolled or folded at all. Might be good for those panels twixt your wind screen and arch, for instance, bit not so good for a camper enclosure. We have a bunch on our aft deck, great stuff.

George
Hatteras 56MY
 
Back
Top