Cleat Covers

khanson

Member
exMember
Joined
Oct 31, 2006
RO Number
24106
Messages
74
I had a friend this weekend who had an accident slipping on the back of there boat and got caught on the cleat. The cleat actually punctured her skin and the doctors say it went 1 1/2" deep. They are looking at getting snap in carpets made for the swim platform which should prevent the slipping but we're also wondering if they make covers for cleats to prevent this from happening to someone else.
 
I've never seen a cleat cover offered. Kind of defeats the purpose of having a cleat in the first place...
 
where is the cleat located?

this seems like a one of kind freak accident, I guess they could use a couple of balls (squash balls?) secured together with a short bungee...
 
I have never seen covers, but have seen flush mounted pop up cleats.
 
The boat is a 2001 Rinker 342. I've attached a picture of another boat same year and model. We were all rafted up at the local swimming area and she was either standing on the back of the boat talking to someone or getting ready to cross to another boat when her feet slipped out from under her.

I thought about the retractable cleats and that still may be an option but when we are rafted up like we were this weekend these cleats are in use when tied off to the boat next to them. After the accident we just covered the top of the cleats with rolled up beach towels. The tennis balls isn't a bad idea either. Not very attractive but I don't think they cares about that.
cleatpic.jpg
 
Kev, I dont think she likes when we call her "Cleatis" now
 
LOL, You know me better than that Joe. I would nnnever "poke" fun at other peoples misfortune.
 
Cleat covers would just be another spot for spiders to breed...Sounds like a freak accident and I hope all is well with them...
 
She's doing fine so far. Just trying to keep it from getting infected. The platform on that boat gets really slippery when it gets wet so I think the snap on carpets will help alot.
 
Your friend needs to learn and practice the "One hand for the boat" rule. When moving about a boat----and especially when climbing
in and out of a boat---she should hold on securely to the boat. That way if a foot starts to slip, she can prevent herself from falling.
You might want to educate her and her husband on this.
 
I had cleat covers that came with a sail boat I owned. I didn´t know what they were until I sold the boat and the new owner showed me how to use them. They were two molded plastic pieces that fit under each side of the cleat and were held in place with two pieces of bungee cord. Very simple and clean set up. Their purpose was to prevent lines from the fore sail from hanging up under the cleat.
 
Did your friend slip on the swim platform...Does it not have a non skid surface on it?...
 
More often than not, platforms do not have aggressive enough non-skid. My Regal was great. My Sea Ray, not so great. Try some Aurora Sure Step. It's like putting topsiders on the soles of your feet.
 
quote:

Originally posted by carver 2557

Did your friend slip on the swim platform...Does it not have a non skid surface on it?...





It has that slightly gritty stuff which does not provide good traction when wet. I will never understand why every boat manufacturer does not go with diamond non-skid.
 
quote:

Originally posted by Turtle 2

I had cleat covers that came with a sail boat I owned. I didn´t know what they were until I sold the boat and the new owner showed me how to use them. They were two molded plastic pieces that fit under each side of the cleat and were held in place with two pieces of bungee cord. Very simple and clean set up. Their purpose was to prevent lines from the fore sail from hanging up under the cleat.





did they look like this? http://www.mailspeedmarine.com/ProductImages/5412.jpg
 
If its on the internet Joe will usually find it.

Carver, Like Joe said it has a slight texture to it and works fine when its dry but once it gets wet its very slick.
 
quote:

Originally posted by jbacchi

quote:

Originally posted by carver 2557

Did your friend slip on the swim platform...Does it not have a non skid surface on it?...





It has that slightly gritty stuff which does not provide good traction when wet. I will never understand why every boat manufacturer does not go with diamond non-skid.








I completey agree. Is it that much more difficult to add the diamond non-skid during the manufacturing process?
 
you can make the same thing with twp pvc pipe caps and bungy cord
 
Back
Top