Cleat Covers

We used to use Rubber kids shoes(like beach shoes) to cover them. Hook one end on and pull, then SNAP it on!

Ugly and stinky but so what.
 
Id go pop up cleats and rather then snap on carpet SeaDek stick on non skid ive got this on my boat its great stuff.
http://www.seadek.com
PageProj06Stingray02.html
 
quote:

Originally posted by Mike McManus

Id go pop up cleats and rather then snap on carpet SeaDek stick on non skid ive got this on my boat its great stuff.
http://www.seadek.com
PageProj06Stingray02.html







Thanks Mike, I've forwarded this link to my friend. The downside to the snap in carpet is it will always be wet. I've seen this seadek stuff on ski boats and I think that might do the trick
 
My God, no one has even mentioned suing the boat manufacturer yet. What's America coming to?
 
Just wrap some extra line around the cleat. Keep some onboard just for that purpose. Or make sure you get the bitter end of the line when rafting up.

Pop-up cleats aren't usually as strong as the sort shown in that picture. That is, they're not usually designed to handle the same sort of load. The one in that picture is probably also backed up by a plate or at least a heavier chunk of decking. A pop-up in that location would likely not be strong enough.

There's just too many necessary, working surfaces on a boat to completely prevent injuries. All you can really do is educate the people on board to BE CAREFUL. And keep a GOOD first aid kit on board.
 
That's actually a good point Bill has. How would you get to that sucker to backplate it for a pop-up cleat?
 
I'm guessing the back side of it is accessible from below in the engine compartment. I know mine are. But you practically have to be half rat-terrier to crawl into the tiny spaces close enough to get to it. That and probably have to use a fork lift to raise the engine compartment cover, and Lord knows what other bits of the engine. I'm guessing cleats are really considered "field serviceable" components.

I considered adding some pop-up cleats to the top of the gunwales. Mainly to let me hang a fender from there to avoid scratches when docking at ports other than our home marina. But when I went below and started looking at the surfaces I reconsidered. There's usually not enough material there to tolerate the likely load. It's not that there wasn't room for a larger backer plate. More that the way that particular panel attaches to the others around it just isn't designed to handle loads from the directions a cleat would possibly pull. I can only imagine someone forgetting not to use the added pop-up cleats for serious hold-downs and yanking off a big 'ol hunk of fiberglass.
 
Would the Pop-up cleats even have made a difference in this case. If rafted up on that side, wasn't the cleat in use?
 
If you get a good pop up such as an Accon thet should be no problem with the strength.
 
Any person who can't understand that having cleats installed vertically on the back of a pleasure boat is downright dangerous has a very serious safety comprehension problem.
I don't see any reasonable way to make them safe in the vertical position, so I'd simply remove them and relocate them somewhere else horizontally.
 
quote:

Originally posted by Adrift

Any person who can't understand that having cleats installed vertically on the back of a pleasure boat is downright dangerous has a very serious safety comprehension problem.
I don't see any reasonable way to make them safe in the vertical position, so I'd simply remove them and relocate them somewhere else horizontally.




In that case, there are a LOT of builder and designers who have a "serious safety comphrehension problem" because I see them everywhere on myriad brands. Let's face it, most of us have never heard of this type of injury before. You just can't make a boat 100% safe and I don't see vertically mounted cleats as an egregious safety flaw. Personally, I like the option of top and rear mounted cleats.

Yes, builders and designers frequently overlook use and safety considerations to the benefit of style--but I'm not certain that the placement of those cleats is one of those instances.

Now, more importantly, is there a drink holder with arm's reach of said cleat(s)?

Paul
 
Back
Top