Cmap question... Amy?

PascalG

Moderator
Member
Joined
Sep 16, 2003
RO Number
12212
Messages
12,221
Amy, maybe you can help with this question...

the boat i run has a pair of Furuno Navnet plotters/radar with Cmap+ charts. The chips are of the same age (about 2003) and i find them to be a PITA! for instance, you can see the colors or numbers of daymarkers without having to select the navaid and view the details.

Do you know if the newer chips have solved this issue?

if so, I would recommend upgrading the chips to the owner, otherwise we'll wait till the plotters die of old age and switch to Garmin tehn. I dont' mind using up to date paper charts or NOAA charts on my laptop for details and "real" navigation but it woudl be nice to have decent charts on those big plotters!
 
Pascal - I use the latest CMap + Wide Area charts on my Furuno equipment and have to select the navaid in order to get the details. My older Raymarine units used CMap chips that were a few years older, but gave you navaid data just by highlighting the navaid. So, it seems to me that having to select the navaid in order to get the info about it is partly a function of Furuno, not just CMap
 
thks... it's a PITA... on the Garmins the color is shown along with the number. much easier to deal with when coming in unfamiliar waters at night than having to use the track ball to select the navaid. that alone can be challenging in rough waters...
 
I agree - it's a real PITA. I figured the Furuno would operate the same as the Ray Marine - big dissappointment, but with relatively new equipment on the boat, I'm going to just have to live with it....
 
I have the older Raymarine RLCRC units with color and the most recent c-map chip. The nav aid info will pop up when the cursor is placed over it, but they are also drawn color and type i.e. red nun. the navaid id is a setting on the chartplotter to show or not on the map without highlighting it.

The chips may be a bit old, c-map upgraded the level of detail around '04. You should call them with the chart code and revision date for confirmation.
 
It's definitely not a Furuno thing per se. I have NavNet vx2 1944CBB and 1920CBB with Navionics Gold chip. Not only shows the color of the marker, but the shape, and distinguishes between buoys and day markers. No highlighting or clicking needed; they are just drawn that way. Also indicates lighted or gong/bell.

In looking at my manual (the manual serves both Navionincs an C-Map versions), it appears that you can configure the C-Map charts to show various levels of nav-aid detail. You might want to get your hands on a manual (Furuno has them on line). For my units the config info for C-Map starts on 7-15. 7-16 has a section on Nav Aid detail, but without a C-Map unit, can't tell you what that gives ya. Sounds like you might be set to "US Simple" rather than "US".

I don't know off hand if you can convert a c-map unit to a Navionics, but I'd sure try the Chart Config function first. The sequence on mine is Menu-A: CHART SETUP C: CHART CONFIG. If that doesn't get it, You might ask a Furuno dealer or Furuno themselves.

George
 
thks..i checked the manual already, looked at various display options... no luck.
 
Sorry I'm late!

It is both a cartography thing as well as a plotter function thing. In this case, you're talking about Furuno NT+ compatible plotters (older Furuno or Navnet '1' models). What Pascal is experiencing is a plotter function limitation. The new Navnet '2' models use the MAX cartography (more bells and whistles) which will display each navaid by color and shape as well as flash in the correct sequence if it's a light.

Pascal - you might want to contact Furuno to see if there are any software upgrades for the units and also contact our Customer Care Department to update those (really) old chart cards!
 
Back
Top