Digital Tach/Synch

Ron

Member
exMember
Joined
Mar 2, 2000
RO Number
76
Messages
89
I thought I had repaired my lightening damaged digital tach/synchronizer yesterday. I found a blown capacitor on one of the circuit boards and replaced it, but it's still dead. This instrument was made by Aquameter (Ensign model) and was in my tower instrument box. It was an excellent meter, easily readable (with 5 RPM increments) in the bright sun and withstood the salt spray and rain. Unfortunately, according to Rule, it isn't produced any more and I can't find a similar replacement. The only thing close is a FloScan Twinscan tach/synch, but it's an analog instrument and of course doesn't have the gradients that a digital display has. FloScan does produce a digital tach/synch, but it diplays only one engine speed at a time. You have to toggle between engines.

Does anyone know of a digital tach/synch instrument for twin engines that simutaneosly displays both?
 
Try Aetna Engineering. I have 2 of their tachs on my flybrdge and they've worked well for 4 years.
 
Thanks, but I only see two models on their website and both are single engine display and no synchronization indicator. I'm looking for a twin display/synch instrument like the one I currently have.
 
The Aetna tachs are great ( have 2 on the tower)and accurate to 1-2 rpm but I'm pretty sure they don't offer any synch indication. I am not aware of anyone who still makes the combo you are looking for, but Faria apparently does make a stand alone ( analog needle type) synch indicator gauge in several styles. http://www.faria-instruments.com/index-new.html Here's one: Synch, Dual Engine
Factory #: SY9601 Part #: 33007 Size: 4" . You still have to have tachs separately from this.

The only other option I know of is that Floscan toggle setup you mention, that I don't like the idea of either.( There may be good J1939 cCANBUS options for some new engines though).

Are you completely against the installation of an auto-synchronizer? I don't know of anyone who has one who doesn't greatly value it, as I do mine.
 
Ron, I have the Aquameters on my boat and love them. It figures, since they work so well, they stopped making them.

Good luck in your search. Did you Google them?
 
Sandy, I can't install dual tachs without a major rework of my custom-built tower instrumentation box, and that would be a last resort. The dual engine display of the digital Aquameter was perfect. The Floscan analog, which displays both engines and synchronization and requires no toggle switch will fit in the same hole as the Aquameter did, but I just prefer the readout and accuracy of the digital instrument. The Floscan digital is the one that requires a toggle because it only displays one engine at a time and I don’t like that limitation. I agree that an auto-synch would be great to have, but I really don't want to go through the effort of installing a Glendenning or similar one.

Hogan, I Googled it, contacted Rule, and even searched ebay for the Aquameter...no luck. I see it listed in the equipment list in many boat ads and often hear from others who have it. I don't understand the decision by Rule to stop producing it.

Robbins29, the LMF-400 looks like a great instrument, but like many other multifunction instruments, it has to be connected to a data bus, in this case the LowranceNET NEMA 2000 network, so that's not an option. Very versatile display, though.

Unless there is a breakthrough very soon, looks like I'll have to go with the FloScan Twintach. I'm going to try one more option...there is a great salvage place locally that has piles of instruments. Maybe I'll get lucky.
 
Ron give microtk a call, they fix all things electronic.1-866-microtk toll free.1-866-642=7685.Maybe they can steer you in the right direction.This is so you can get info they do not sell new instuments.
 
Ron, for what it's worth, I installed the Floscan Twinscan last season and absolutely love it. I, too, would have preferred the digital to the analog, but it wasn't to be found so I went with the analog. I couldn't be happier. Of course, I have no experience with anything else to which to compare the Twinscan so I may be a bit biased (or uninformed).
 
Thanks, Ironworks...I may do that.

Randy, barring any breakthrough on the Aquameter, I'm sure the Floscan will be suitable. The difference though is in the accuracy. The analog gauge scale isn't near as finite as the digital readout, which is in 5 RPM increments. It's great for tuning engines and setting idle speeds.
 
Ron

About a year ago I was looking for one. I tried ebay and just tried everywhere I could think of. Salvage yards ect. It is a great unit. The unit works well but the plastic lens is so discolored during the day its almost inposible to read. During the night the light makes it hard to read. If you do decide to replace it and you are going to toss it let me know I'd like to buy the case from you If its the one that is mounted in the dash. They did make two models. The other mounted on the dash with a bracket.. Thanks Joe
 
Ron- Sent you an e-mail with a very remote possibility,..... more likely close, bu no La Corona.
 
I sent a private E mail. I believe that I have one of these for sale in a consignment shop (I was going to use it but sold that boat).
 
Sandy, Bob, thanks for the effort. Unfortunately I was not able to receive the emails. Since I used to hang out here, we had a format change in our email address. I updated it last week, but am unable to complete the confirmation step. I've asked Les to help. I'll let you know when my correct address is available. In the meantime, I'll send you my correct address via PM.

Bruce, when I contacted Rule, they didn't seem interested in supporting the product.

BAY, if all fails and I have to go with another unit, you can have the case, no charge. It's the dash mount model and is in like new condition.
 
Ron, how much of a rush are you in? I am working on a possible solution for you.
 
I can wait, Mike. My tachs and synch meter on the bridge station are fine so I can monitor engine speed. The Aquameter is in the tower station. Thanks,
 
I have thw Aqua Meter dual tach on my 1986 Silverton. I am very interested in this thread as I am having a problem with mine also.
 
Back
Top