dinghy lock

ctcruiser

Member
exMember
Joined
Oct 12, 2005
RO Number
19289
Messages
327
Hey guys I see plenty of outboard locks but no dinghy locks per se. I know I can just buy a cable lock but thought I would see what you guys use and like for your dinghy's.
 
a cable or a chain... at the typical crowded dinghy dock you need some slack for others to get to the dock by pushing your dink out, so 10' of chain works pretty well.
 
Where are you locking your dingy? On the bow? On the swimstep? On the dock?

I keep mine stored on my bow and use my anchor chain to lock it down. I keep my motor locked up in my dock locker.
 
For the 13 foot Whaler I use a 10 foot coated wire cable that came with loops at either end. I think that it was probably intended for bicycles. The boat end is secured to the bow rail and the dock or big boat end is secured to whatever is available. Two heavy duty keyed Stanley locks do the securing. The coated wire cable is lighter than chain and doesn't rust, corrode or otherwise get cruddy in salt water.
 
yes coated wire run through the motor and anything else then through some part of the dingy such as the lifting or tow shackle. Nothing will prevent a determined thief I just want to make it harder.
 
Agree with above. I have several 15 foot pieces of 1/4" SS Cable covered with vinyl (Lifeline material), with swedged eyes on both ends. I usually have an eye bolt on the dinghy transom, with the head peened over, or high strength loctite on the threads. The cable goes through this eye, through some part of the engine, and then to the dock--where it is either thru a bolted cleat or thru the boards and locked. The idea is to make your dinghy harder to steal than another dinghy. DO NOT rely on inflatble bow eyes or towing handles etc which are fabric and glued on. I had a brand new 13 foot dingy with a 25 hp outboard stolen which I had just bought, and not put the transom eye on--and the one night I had only the bow strap/towing eye securing the cable. Someone came by water and cut that fabric and took the boat and motor! Both cable and chain are more difficult to cut--and if any question I put the dinghy back on the boat. Most thief's are more likely to have bolt cutters or a hack saw--the cable is harder to cut with these--but it can be done. Rigging cutters cost much more and are less likely to be available.
 
Back
Top