dinghy motor

bob t

Member
Joined
Sep 10, 2007
RO Number
28533
Messages
26
Question:
for a 9' achilles inflatible w/blow up floor...
4hp yamaha 48lbs
4hp merc 55lbs
4hp tohatsu 57lbs
not enough hp? not going anywhere in a hurry. to be used as a tender. any opinions or advice?
thanks
bobt
 
For durability I'd go with a Honda BF5 60lbs. but 4-5 hp is going to be really slow. whats the max hp. for the boat, If you can a 9.9 is a good all around choice . good luck Pete.
 
I have a 10'4" inflatable floor dink.
Looked at the weight vs HP issue last year and bought a rebuilt 9.9 mercury (2 stroke)that was rebuilt to 12hp specs by a retired MErc engineer. It came in a nice plywood crate and looks like a new engine.
It weighs 64 lbs.
We can get on plane with 2 adults and a yellow lab.

The dink can be great fun and this sumer we're going to try it with a pull toy.

Send me a private e-mail and i'll send you the rebuilder's e-mail address.

RWS
 
if you don't need to get up on plane, a 2 hp will be more than enought to get you where you are going. i prefer the 2 cycle in that range, the 4 cycle single cylinder vibrates quite a bit more, very quiet compared to the 2 stroke,but you hand feels like youve been holding a sander all afternoon with the four stroke.
 
I have an 8'6 with a 2.5 Nissan and worked just fine with 2 adults to get to shore or just poke around. 2 stroke engines can lay on their side but from what I understand, it's harder to store a 4 stroke as you can't lay it down.
 
If you decide to go with a 2hp Hondas has a neat little feature air-cooled , no water pump to worry about. All the major brands especially the reliable 4-strokes are very close in performance today in the lower hp ranges , very quiet too, clean running etc...
almost can't go wrong with any choice, BTW the honda bf2 is only 27 lbs & spins 360 deg. no reverse shift to mess with, pretty cool technology these days we live in huh. good luck & have fun with your choice , Jon
 
thanks guys for all the input. looks like it may be a 4 hp yamaha. of all places cabellas here in mich sells em at $1025 fueled, tank tested,ready to go out the door with all papework and warrantees. i'll let you know how it works out.
 
Bob,

You'll not get on plane with that 4 hp Yamaha, but it should keep you moving in a strong current.

RWS
 
I have a Walker Bay 10' with the 8hp 2 stroke Yamaha. 60 lbs.
Great motor and boat combo.
Craig
 
I have a 8 hp Yamaha (2-stoke) on a 9' Caribe lightweight RIB- it will plane off easily- excellent combo. Lot's of power, easy starting (even by kids, usually 1 pull) and easy to bring on board. Best outboard I've ever owned (least quirky). I've had a 4 hp, but it limits you to displacement speed- OK unless you need to cover some distance.
 
My main concern with a dinghy motor is weight. I have a 4 horse 4 stroke Nissan which performs perfectly; however, I can't put it on or take it off without help from another guy. My wife can't lift it up or down from my dock and I don't know how long I can continue to do so. I am considering installing a davit lift on the dock and then towing the dinghy with the motor mounted on it. My owner's manual says this is a no no but several RO posts on this forum report that they do this all the time. The other option is to trade down to a lighter motor. . . who needs a dinghy to plane anyway?
 
Consider mounting the lifting davit on the boat along with a small block and tackle for the lifting.
A webbing bridle can be used to lift the engine and swing it out over the dinghy and place.
I've seen ads for setups like this so check some of the magazines or approach a local fabricator.
 
I have the Garhauer davit which works very well for lifting outboards (up to at least 15 hp). This can also be used to pull a person out of the water if need be.

I would be cautious with a 2 hp outboard on a 9 to 10 foot inflatable. In normal conditions the 2 hp may be fine, but if you get caught in heavy wind, you may not be able to make headway--I know from experience. I now use 3.5 to 4 hp dinghy engines...
 
Back
Top