ccdjoe, I don't know of anyone who makes a semi dory dinghy of the size which might work for a dinghy on the boat like you have. However, it is very easy to make one--stitch and glue, using Brunzyl plywood, glass and epoxy. A good place to start looking is at Glen L kits and plans. Glen L has been around a long time. There are a number of boats there which can be scaled up or down, and make very good rowing/power boats. It would take one to two weekends to build one of these boats. Lots of options.
I grew up with a couple of home made dinghies--one 6 feet long, made of 1/4" plywood in 1932 and still going strong when my father donated it to the Sea Scouts in 1970. He then made an ultra light dinghy--about 6 feet long, but with a pram bow at the clamp and fine entry at the chine. This weighed about 25 lbs (hollow floor board which one sat on, no seats. Another was 8 feet long and we rigged with a sail, dagger board etc.
I grew up with a couple of home made dinghies--one 6 feet long, made of 1/4" plywood in 1932 and still going strong when my father donated it to the Sea Scouts in 1970. He then made an ultra light dinghy--about 6 feet long, but with a pram bow at the clamp and fine entry at the chine. This weighed about 25 lbs (hollow floor board which one sat on, no seats. Another was 8 feet long and we rigged with a sail, dagger board etc.