Dinghy

ALKA2710

Member
Joined
Mar 5, 2007
RO Number
25407
Messages
670
Has anyone used there dinghy to tube. 15hp motor seems like with 1 adult 1 kid and 1 kid on the tube might work Worried about pulling the transom off the tube. Any thoughts.
Al
 
I plan on trying it with mine.

Will drill holes in the transom for a ski hook.

RWS
 
mine is a mercury marine 340 airdeck. There is 2 holes in the transom that I could put a bridal through. I guess I could give it a try. It's supposed to be warranted.
Al
 
Tubing is almost impossible. We had a 11 foot AB Nautilus with a 30HP Honda. Waterski, kneeboard, wakeboard yes, but tubing no. I finally found a vinyl only tube, so no nylon covering and if the kid kneeled in it I could not get on plane. It is just too much drag. If they sit in flat and have the legs hanging over it worked but most kids thought that it was not fast enough. I towed with a bridle through the two lifting hooks on the transom. Now that is afully integrated transom in a RIB, not just a board. I have many different style tubes as some here may confirm, even the flat saucer type, pumped up as hard as possible will not be able to tube because of the drag of the nylon cover, it is like a huge sea anchor. It is just not enough HP to get the tube really on plane it just drags. We have a new dink for this year a Zodiac 350 Projet, with 104HP for 2008. I hope it can handle regular tubes.
 
i've got an 11' novurania RIB with a 25hp yamaha and it does fine pulling kids around on the tube. i've never tried it with a full sized adult on it, but i've had a pair of kids on the tube and it worked fine with two people in the boat. i'm guessing that you don't have anything to loose by trying to tube with your set up. i doubt i could pull a skier out of the water with my set up without drowning them first....lol. but the tube is'nt that much drag to get started. go have some fun!
 
Back
Top