Dingy hold down

pdecat

Well-known member
Member
Joined
Jan 1, 2000
RO Number
842
Messages
11,588
For those with a deck mounted dingy what system do you use to hold them down but still allow fast release??
 
on my boat i use a couple of lines since i rarely go offshore...

on Charmer we have straps with SS ratchets to secure the 15" RIB and the jet ski. they're pretty easy to release, the problem in an emergency at sea would be having to hold on while reaching the ratchets. I'd use a knife instead of messing with them, I guess using snapshackles would allow faster release.
 
The dingy is mounted athwartships in a solid cradle so my snap shackles are under some strain in order to keep the dingy in place in the event of a lot of rolling. That has the undesired result of making opening them sometimes difficult. When positioned perfectly in the cradle they are easier to open but more often than not there is some strain. The idea of cutting a strap is useful but that means a knife needs to be always available. I don't carry my cutlass anymore since i retired from pirating.
 
again the nice thing about this threads is forcing to get into what if scenario. Maybe a good idea to mount a knife somewhere by the door to the boat deck, even just a velcro strap.

of course, once the vessel stability is affected by the water sloshing below, you never know how low it will stay upright.

also, snapshackles have a ring on the release pin, might be worth tying a piece of thin cord to that it easier to pull.
 
Are there any kind of shackles that will "quick release" under load? I am picturing something like the quick release on a safety harness. They are designed so that even if you're hanging overboard from one, you can pull a short cord to release. You could use something like this at the tie down points but then use the regular ratchet part for every day use to secure the dink tightly. Just spit balling...
 
I use the (light duty) White webbing straps with SS cambuckle locks to hold the dingy. Easily cut off in an emergency with a ss knife kept mounted nearby. Anything else is time consuming or difficult to release when needed? On a listing boat imagine trying to reach each Snap Shackle to release it? if you don't have a knife to cut them a Snap Shackle is faster then trying to unbuckle a strap? What setup is best? PS I also kept two 25' lines 1 Fore & Aft attached at all times. You WILL need them.
 
For a very worst case situation, is there a hydrostatic release like a life raft cannister available?

Personally, I do as Pascal suggested. Mine is on the swim platform and I secure with straps and I keep a dive knife attached to one of the straps with velcro wraps.

Bob
 
Back
Top