diy hard top

jdhcompass

Member
Member
Joined
Jan 1, 2000
RO Number
247
Messages
74
So a month ago we had a lot of snow here in Vancouver. I just couldn't make it down to keep it swept off and the result was this:
bentss.jpg


You can probably notice which bar was holding up the bimini at the time several feet of snow accumulated and which bar is the replacement. Now I'm thinking about building a hard top for the boat. It can't be that difficult, can it? My brother-in-law has a well equiped sheet metal shop in his basement. I was thinking of doing the entire thing in marine grade aluminum. Has anybody tried a project like this?

Cheers, John
 
Charlie the boat, top and windows looks great. I saw another attempt at an enclosed hardtop on a larger boat and it was fugly.
Bill
 
Bill,
I'm surprised. Usually, the larger the enclosure, the better the length to height dimensions make it more symmetrical.
 
That looks pretty decent Charlie. Thanks for posting. A full enclosure like that would be ideal for the rainy Pacific Northwest. I was rather optomistic when I bought a 'sunbridge' cruiser for this part of the world.

Cheers, John
 
I would have liked to have made an Alaskan Bulkhead if I had a bigger boat with a bigger cockpit. What size/make is yours?
 
John-
If you're good at bending and welding, anything's possible. Here's a shot of a beautiful DIY T-top made from EMT electrical conduit and topped with Starboard:
Homemadet-top.jpg
 
Lots of work to build a really nice one. This one took over a month to build. Flat ones are easy. Building a mold first for a curved one takes most of the time.

105_0522.jpg


Putting foam core in after a few layers of resin then mat for the top.

Newtoptopside.jpg


Out of the mold. Time for hours of sanding & filling.

108_0826.jpg


After multiple base coats, more sanding & filling, an awlgrip paintjob.

108_0862.jpg


Carpet stuck on inside to deaden engine noise. (it works)

20070817_0001small.jpg


Finished product
 
We've had a thread or three on this 'home made hard top' and also the choice of Hard top vs Soft top, but in all of them I never saw anything as encouraging as veebyes. He makes it look doable for sure.
I always thought of that using the std Conduit benders and setting panels on the Stainless for a top, and continued use of the Sunbrella for the sides.
Yeah, it looks doable to me. Just think of veebyes or Charlies hard top with canvassed in sides.
 
Doug, that is one professional looking project! Had you done fiberglass work on that scale before? This would be my first project and if I thought I could get results like that I'd be willing to put the time into it.

Cheers, John
 
I had help but both of us are amateurs. The 'help' had more experience than me & had a plan in his head of the how to do it.

The nice thng about fiberglass is that you can grind out your mistakes & do it again. As you go along your confidence & ability improves. It is messy but rewarding work. Once all is done & nicely painted nobody has to know about the mistakes or re doos along the way but you.

We also built a swim platform from scratch. That came out nice too. Much more robust than most production platforms.
 
Yeah, it's a really nice job. One of the time consuming parts is constructing the mold and frame. The basic curved shape comes from plywood sheets and a frame made to hold the curve. It's nice to have a slight downward droop to the forward edge. It's all in how you design and cut the forward section of ply and the frame to hold it. Build a 2" or so lip around the edge. You can use plaster to line the basic mold and create a cove along the inside corners along the lip. a release agent is applied to the inner surface of the mold. Gelcoat can also be 'spray painted' on the mold at this stage before the fiberglass. How smooth you make the mold dictates the final outcome. It's a lot of work but the outcome can be spectacular as you can see by Veebyes job.
 
I'm sorry I did not take more pics of the job. The mold was a bear to make. We lined the inside with gloss Formica (hard to find gloss these days) & put Don't know how many coats of paste wax after that as a release agent. Still wound up with hundreds of pin holes to fill & sand & fill & sand & fill & sand...........
 
Back
Top