DIY Hardtop

In the know

Active member
exMember
Joined
Apr 12, 2006
RO Number
20824
Messages
2,958
Anyone ever built their own using a mold? If so, the layup schedule and finishing technique?

I am debating this winter project. So far costs from professionals have been all over the map, from the ridicuously stupid of $750.00, ot the equally stupid of $12,000.

Please keep in mind that I currently have a hard top, with full canvas enclosure. The issue is that it needs to be 3 feet longer, because when running in the rain, all the water runs off, right where the helm is.

Mrs. Know is constantly complaining in the rain, that Little Know and I are dry, under the hard top, while the water is running on her at the helm.

My plan would be to use the existing one for the camber for the mold and just add 3 feet using the same camber uniformly back.

Thoughts?
 
98 Pursuit 2800

Here are two pics. Essentially, I want the exact same top, only to extend 3 more feet aft to cover the helm area

chaser1.jpg


chaser2.jpg
 
Why does it have to be a hard top. Can't you extend it with canvas?
 
Great looking boat, I agree with Dave, how bout an extended canvas?
 
Believe it or not, you can make a mold of the current top in the middle portion of it(not using the rounded ends). Now cut the top in half and fiberglass in the piece you just copied.

As others have said though, canvas would be a cheaper alternative.
 
Another option is replace the strata with ez2cy. I nice solid panel add a wiper and leave it closed in the rain!
The panel can snap to the hardtop when you want to open it.
 
I like the idea of cutting somewhere in the middle and cloning it from that point instead of trying to recreate the back curves.
 
I appreciate the effort to keep the admiral happy. She must be really cool to consider boating in the rain :)

The extend a top is cool but it seems to be for shade verses rain. Doe the hardtop really do good in a rain if it is blowing in sideways? Unless you can extend the MA summer and stop the rain from coming in at a slant will any option fit the goal? Good luck either way.
 
You can tell you've never done this kind of work. Because $750.00 does not sound "ridicuously stupid" in the least to me. But there is a touch of irony in that statement. ;-)

There are a couple of good books out there on fiberglass work. I'd pick up one of those and give it a read before you start.
 
Either way you decide to extent the top, it will require added support.

A thought, If you decide canvass, a free standing 'hoop' mounted on top of the gunnels, half the distance of the length of your extension. It will be able to fold/pivot forward, out of the way and still support side panels...and of course be removable.
 
Just buy her rain gear and tell her to stop complaining!
 
quote:

Originally posted by Capt. Bill1

You can tell you've never done this kind of work. Because $750.00 does not sound "ridicuously stupid" in the least to me. But there is a touch of irony in that statement. ;-)

There are a couple of good books out there on fiberglass work. I'd pick up one of those and give it a read before you start.






I meant in the sense that $750 is too low.
 
Thanks for all the replies. I am not envisioning how canvas would help this problem. Maybe I am not explaining it properly.

The issue is rain water running off the top of the hard top and landing on the helmsperson. Picture where the 4 rocket launchers and the cockpit light are - the hard top stops just shy of the leaning post, so the water runs off the top, and lands right on the head of whoever is at the helm - much like water running off of a roof.

Last night, a local fabricator gave another idea. He said he could fiberglass in to the top of the hard top, an L like channel that would divert the run-off tot the port and starboard side, using the natural camber in the top. (much like a rain gutter). Thoughts on this idea?
 
quote:

Originally posted by jtybt15

Either way you decide to extent the top, it will require added support.

A thought, If you decide canvass, a free standing 'hoop' mounted on top of the gunnels, half the distance of the length of your extension. It will be able to fold/pivot forward, out of the way and still support side panels...and of course be removable.






I have a call into Pursuit and they are supposed to get back to me with the yes/no on additional support. If it needs additional support, they said they would tell me exactly where to add them, as the top and the supports are all factory.
 
yea, I've done it. It's a lot of work and a huge expense even considering just materials. The one I built was 8'x8' (no pics at work but I can post some later). Mine has a built in electronics box and a hatch for access to the top side. Materials alone were about a grand and labor was about 80-100 hours including mold making. The $750 option seems out in left field.

I too like the idea of extending yours. That' a much more practical approach than starting from scratch. I would mold off your center section first, then cut the top and seperate the halves as desired. Feather each half about 12x the thickness and use the mold you made up previously to lay in the new section. This will still probably run you $400 in materials and a good amount of work on both the top and the structure additions but- that's way easier than a full blown top.
 
Use waxed abitibi panels to extend the underside of the hardtop. Layout about a 1/4 inch of fiberglass using a biaxially sewn 24 oz mat and woven roving. then put a layer of end cut balsa or plywood pieces, soak with resin, then add another 1/4 inch of fiberglass. let cure, remove the mold, dress the edges, sand smooth, paint with gelcoat, sand smooth, polish, wax, install equipment and enjoy...
 
I am missing something here. How does extending the top aft increase coverage of the helm? I would think it would extend coverage of the cockpit.

I have seen a lot of boats around here that have a canvas extension on their hard top that extends all the way to the transom.

G
 
Back
Top