Neal
if you are pinned alongside a dock, it's real easy. you put a spring line from your mid ship cleat (or bow), leading aft to the dock. about 1/2 length of you boat. put the sterndrive in forward and turn the wheel towards the dock. That will kick the stern out, when you're at a 45 deg angle, straighten out the drive and back out.
the last thing you want to do in that situation is try to leave bow first in forward, that's a sure way of banging the stern/swim platform in the dock.
obviously when springing off like that, you need to protect the bow. If you have wooden piling, you can just pivot the rubrail against the wood... if you are against a dock, all you have to do is put a couple of big fenders at the bow.
I use the same technique when pinned agaisnt a concrete bulkhead I often tie up to. for my boat, i use a couple of 18" balls. on a smaller boat you can obvoulsy use smaller fenders.
note taht this works well with twin engined boats, except that you dont' have to use a spring line. you put the offside engine in forward, rudders turned into the dock, and use the dockside engine, in reverse, as a spring line.
the animation above rarely works since you almost have boats sticking out beyond the pilings...
back to the original question, a spring line won't do you much good until you are at least partially into the slip. it will help keep the boat lined up but as you get in the bow can still get pushed by the wind.
what you want to do is secure a spring line from your midship or stern cleat to a piling or cleat as you back in, the line has to be long enough to let you back in some more. as it gets taught, it will keep the boat lined up.
otherwise, the trick is to anticipate the wind and let it help you. for instance, if you're coming down the fairway to back into a slip on your port side and the winding is coming in the opposite direction, you need to overshoot the slip a little as you turn away to line up. Then when you start reversing the wind will push the bow as you back the stern in. the goal is to be lined up when your stern gets in.
I always turn the boat away from the slip as I come in to line it up before i back up. I find it easier to back up in a straight line than backing and turning at the same time. It's also easier to move the stern sideways if you're not perfectly lined by the time i'm in position 3 (second row)
the second method also makes it easier to anticipate the wind.
-If the wind is blowing from the right, I will overshoot the turn so that the boat is further right when it's in position 3.
-If the wind is blowing from the left, i will under shoot my turn so that the boat is further left in position 3.
- if the wind is blowing from the top, all i have to do is approach in 1 favoring the left (dock) side.
- if the wind is blowing from the bottom, I favor the right side knowing the wind will push me back into the slip.