Eisenglass Staining

rdgreenwood

Member
Joined
Apr 24, 2006
RO Number
20992
Messages
16
We just unrolled our camper top and found that one panel of the eisenglass has severe staining--mostly eminating from the bottom and going about a third of the way up, with spots elsewhere--that is hard, resists scraping, and light brown. Has anyone else seen this? If so, is there anything that can be done about it, short of replacing the eisenglass?
 
I've known some canvas folks that have used either Finness It from 3M or 925 Collinite on a buffer to remove the spots, but I don't know if it will help the color problem.
 
Rich,

We just had a thread on this issue. I've used Armada 210 Scratch Remover, lots of elbow grease and followed it with a treatment of Armada 210 Polish to remove scorch marks, scratches, etc from my vinyl. I found it worked great for me.

In the future, do not store your vinyl windows rolled. Mine always wintered hanging from clotheslines in my basement. Over the winter I'd bring one panel upstairs each weekend for its annual "deep cleaning" and polishing using the above method. If you don't have a place to hang them you can store them flat under a bed but with an old sheet, towel, etc between panels. The goal is to not store them with vinyl against vinyl.

Have a great season Rich. We are still boatless while building our new place on Still Pond Creek but I do look forward to reading you stuff in the Nor'Easter when we can get a copy.
 
I agree to never store them rolled up! Even on the boat, I remove them and lay them flat instead of stored in a rolled up position. The vibration and movement of the boat will cause them to scratch.
 
Oh, my goodness! Okay, I was foolish and rolled them up. I promise I'll never do it again. Mea culpa, mea culpa, mea maxima culpa... Now, is there anyone who had been similarly foolish and found a way--besides "don't roll them up"--to remove the brown, opaque stain?
 
Thanx. That's what I fear I'll have to do. Oh well, no use being dumb if you don't show it...
 
My eisenglass had severe stains on it. We tried everything. Finally said heck with it and used 3m cleaner wax on it. Cleared it right up and has given us an additional 3 years with it...
 
quote:

Originally posted by rdgreenwood

Now, is there anyone who had been similarly foolish and found a way---to remove the brown, opaque stain?





try 210 plus followed with 210 cleaner.

http://www.sumnerlabs.com/index.htm

Brown , but not burnt? even new vinyl will turn a milky cloudy if it is rolled up wet and sits in the sun, it will cloud right up, just lay in the in sun to dry and it will clear up in time.

ive even had an accedent with a magic marker and removed it off a window with 210.
 
I'm with Mike. Armada 210 Plus Scratch Remover, elbow grease and follow with Armada 210 polish.
 
According the the head of maintenance at Haven Harbour, it could be a fungus. Anyone heard of this?
 
Dick,

I guess that's possible (moisture trapped in the roll) but even if it is I would treat it the same way. Even if it is a fungus I would not attempt to clean it with bleach or any other harsh treatment unless it was a last resort.
 
We store our eising glass rolled. We lay down an old bed sheet, fold it over the glass and roll. My wife made bags to put the sheets in when rolled. Somewhat of a pain to roll, but well worth the trouble. We can get the bimini in one bag and the camper in another. Just my .o2 cents.
 
Harlan, you are correct. As long as all the eisenglass is protected from rubbing against itself or other rough surfaces. Even towels can be too rough!
 
I have used Finesse - It and also regular car polish to clean the eising glass. If you choose to do that, use low speed on the polisher and light pressure or you will burn it. The last thing I do is, apply a product called Plexus. The best protectant I have ever used, shines and leaves them slick and glossy.
 
Dick,
Are you stepping-up or stepping out of boating?
 
Definitely not stepping out! We've decided that an aft cabin would be more in tune with our approach to boating. Once we sell our Chaparral, we'll buy either a Carver or Mainship in the 35ft+ range, probably a model out of the late 80s.
 
Back
Top