B
blouderback
Guest
Hi all,
I have a single battery in my 21' bowrider. As a precaution, I carry one of those jumper packs on board when we go out for the day, as we often will float around in a cove and placy the stereo and I don't want to be stuck with a dead battery.
The problem is, I always have to remember to dig it out of the boat the night before and charge it on the workbench, and then remember to put in back in the boat in the morning.
Here's my idea, and please tell me what you think, safetywise and such:
First of all, I *THINK* the unit will charge off of a DC outlet, but I'm not sure.
What if I were to install a DC outlet in the engine compartment, one that was only on when the engine was running? Then, I could keep the unit plugged into that outlet at all times, and it would catch a charge everytime the engine was running. It usually only takes an hour or so on AC to get a full charge, but I don't know about DC.
*IF* it doesn't charge on DC, what do you all thing of me installing a DC/AC inverter in the engine compartment, again, one that is only on while the engine is running?
If the issues are installing this in the engine compartment, please say so. I *could* investigate using some space under the helm to install the outlet (AC or DC), and then have a nice place to store the unit out of the way. However, that would entail some cutting into the fiberglass under the helm area, and I'm really not sure if there's enough room under there anyway (until I cut into it).
Here's a shot of the helm area that *might* have enough room to store am 18" x 10" x 10" battery pack and outlet:
I have a single battery in my 21' bowrider. As a precaution, I carry one of those jumper packs on board when we go out for the day, as we often will float around in a cove and placy the stereo and I don't want to be stuck with a dead battery.
The problem is, I always have to remember to dig it out of the boat the night before and charge it on the workbench, and then remember to put in back in the boat in the morning.
Here's my idea, and please tell me what you think, safetywise and such:
First of all, I *THINK* the unit will charge off of a DC outlet, but I'm not sure.
What if I were to install a DC outlet in the engine compartment, one that was only on when the engine was running? Then, I could keep the unit plugged into that outlet at all times, and it would catch a charge everytime the engine was running. It usually only takes an hour or so on AC to get a full charge, but I don't know about DC.
*IF* it doesn't charge on DC, what do you all thing of me installing a DC/AC inverter in the engine compartment, again, one that is only on while the engine is running?
If the issues are installing this in the engine compartment, please say so. I *could* investigate using some space under the helm to install the outlet (AC or DC), and then have a nice place to store the unit out of the way. However, that would entail some cutting into the fiberglass under the helm area, and I'm really not sure if there's enough room under there anyway (until I cut into it).
Here's a shot of the helm area that *might* have enough room to store am 18" x 10" x 10" battery pack and outlet: