Engine flush in slip?

motostew

Member
Joined
Mar 26, 2007
RO Number
25640
Messages
60
OK this may sound dumb but we are considering keeping the boat in a slip this year instead of dry stack. I have twin Volvo 5.7's ocean series. How do I flush the motors as it is kept in salt water. It does have hose hook ups near top of motors but what keeps it from drawing water from underneath. It also has the nutra-salt system but I wouldn't think that is enough alone.
 
What does the Neutra-Salt system manual say? It was my impression that these systems are intended to be installed and used exactly as you intend to do.
 
If you don't have seacocks on the raw water intakes, I don't know how you would prevent that unless you can get the drives up and out of the water where they won't suck up any raw water.
 
C Spray is correct. The Neutrasalt system is intended to be used exactly for this purpose.

You got it, just use it.
 
Neutrasalt is enough.

However how did you flush it on the dry stack and preventing it from "sucking" air trhough the regular water intakes? Same thing. If you do the hose hookup test it first by running the water into a bucket and let the engines suck it with another hose from the bucket. If the water level drops in the bucket then you waterflow is not enough and you would overheat your engines.
 
I have fresh water flush on my raw water cooled Volvo 5.0's. As I understand it, the water pressure coming from the city water effectivly cuts off the raw water coming in from the intakes on my outdrive legs. I just hook up when I come into the slip. Run the flush for about 5 minutes and then shut the engine off while flush is still running. Then switch to next engine. System seems to work as my boat is a 2001 and I have not had to do the risers and manifolds yet. Probably next season though...
 
My boat has the Perko fresh water flush inlets mounted on the transom that feed fresh water into each engine to flush all the salt water out. When you remove the caps for the inlets, the engines will not pick up raw water. I have learned this the hard way (like many boat things), if you leave the dock with the flush caps in your pocket, the engines overheat very quickly and set off engine alarms. The instructions are once back at slip, do not let the engines cool down, you want the thermostats to remain open. Connect the fresh water hose to each inlet and run the engine for about 10 minutes. Cut off the engines BEFORE you cut off the fresh water to prevent raw water from entering.

If you have the Neutrasalt it is supposed to be good enough.
 
Thanks for the help, I think Prospective might have the same set up. And yes the Nutrasalt is supposed to be enough and is all I do when I stay on the boat during trips and such. Thanks again.
 
Back
Top