I'm a Generac Generators dealer. We don't sell marine generators, but running under load is mostly required in diesel generators. For diesel engine driven generator sets running without a load can cause ‘wet stacking’. Wet stacking is when unburned fuel accumulates in the engine exhaust. This is caused by under loading a generator. When exercising a generator, or running it for short durations while under loaded, or with no load, the engine may not reach its optimum operating temperature. When this is allowed to continue for long periods of time the unburned fuel accumulates, and can become harmful to the engines efficiency and life span.
This also applies a little to gasoline powered generators, though not as important as it is to diesels. Any load is probably enough with a gasoline generator to keep condensation out of the alternator windings, and to keep corrosion off the brushes.
The home or business stand by natural gas or propane generator burns a very clean fuel, so there is virtually no unburned fuel deposits in the engine. Testing without a load is just fine, mostly designed to keep oil on the bearing surfaces. Remember the harsh operating condition of a standby generator, it starts from cold, immediately goes to 3600 RPM, then has a big load dumped on it, all within seconds. Thats why we like to see the weekly "running" to keep the oil on the parts that need it most.