Fuel Flow Gauge

kbradatzke

Member
Joined
Aug 27, 2006
RO Number
22986
Messages
70
I have a 2000 Sea Ray with twin 4.3's . I would like to put a fuel flow gauge in it but I am limited on dash space. Mostly I would like to keep track of total fuel used . I have seen the Northstar F210 , it is a small dia , now it looks like it is only for single engine applications but I have seen a twin enginge kit for it. Does anyone have this type of gauge on twins and if so how does it work with twins ( do you have to switch from port to starboard with a seperate switch? ) Any comments would be great. Kelly
 
Do a search on FloScan. They have several models at several price points. I installed the analog unit on our Carver with twins and used a switch to toggle between engines and get the real time use per engine. The digital readout for the Total Fuel Used (Totalizer) did read total overall used for both engines without needing to switch or due math. I was very pleased with the unit and installation was not difficult.
 
The least expensive--and a good unit--is the Lowrance LMF 200, a 2 1/8" guage. This will read two engines, give fuel flow, and total used, even without a GPS. With the GPS, it will give gallons an hour. It will cost about $150 or maybe a little less with two transducers. The LMF 400 is a larger instrument display--but gives the same information.

I have the equivilant (Standard Horizon and Navman) of the Northstar F 210 and I like the Lowrance better...The flowscan is an excellent instrument but is more expensive. I have been using these less expensive fuel guages for the last 5 years and they are quite accurate--I suspect I pay for them in about a year by the fuel conservation by finding the most effecient speeds and trim attitude.
 
Thank you for the reply I will check out both the Flowscan and the Lowrance
 
Back
Top