GPS Antenna Interchangeability

rwilhite

Member
Joined
Feb 19, 2001
RO Number
3478
Messages
155
Had an ICOM ML-360 Chart plotter that dropped dead. Less than a year ago I bought a Garmin GPS antenna that plugged in to the chart plotter using the same style connector as my marine VHF radio.

Just bought a Raymarine 425 chart plotter used that did not have an antenna with it. Now I find that this unit is supposed to be connected to a Raymarine 120 or 125 WAAS GPS antenna that goes for $300!

My question is why can't I use the old antenna - besides the cable not having the correct connector on it? If this Garmin antenna outputs in NMEA 0183 format and my new chart plotter accepts NMEA 0183 input, why wouldn't it work just as well?
 
A Raymarine 120 or 125 is a bit more than a GPS antenna. It is an active GPS receiver. The Ray 425 apparently requires an active antenna. If your old antenna outputs NMEA sentences, it "should" work with the NMEA input on the 425, if it has one. Typically, active antennas have wires for 12vdc and NMEA output. Passive antennas, usually have a coax adapter. Do you know the model number of your Garmin antenna? Perhaps we can determine if you have an active or passive model.
 
Not only do various manufacturers use different methods of processing the data, they also use proprietary language. Your Garmin unit may have NEMA083 out of the receiver, it may not have NMEA083 out of the antenna. My experience with buying cheap used electronics is that it winds up being expensive and you wind up with old technology.
 
Randy I think there is some comfusion between antenna, active antenna, and GPS receiver. An GPS antenna is just like your VHF radio antenna only of specific dimensions fpr the GPS frequencies and will connect through a coax cable to a GPS receiver. An active antenna is simply an antenna with an intregal amplifier this too must be connected to a GPS receiver power to the amplifier can be through a seperate wire but more often than not is powered through the coax via the GPS receiver. Only the GPS receiver will output a NEMA0183 sentence and will be via an RS232 interface more recently a USB buss.
If the Raymarine 120 or 125 you refer to is the Raystar 120 or 125 they are GPS receivers with NEMA0183 outputs. If your "Garmin GPS antenna" is a GPS 16 or similar I believe the two can be made to work together as the GPS 16 also outputs NEMA0183 sentences. If these "Ifs" are true email me and I will try to help you get connected. woglen2rb2@gr5tyahoo.com
 
Back
Top