Hardware help needed

Tommy Allen

Member
Joined
Jan 1, 2000
RO Number
366
Messages
174
I saw a "gizmo" on a new boat Sunday and I can't find one anywhere I've searched.

It was a magnetic "latch" to hold the door to the electronics box open (help up against the hardtop.)

A piece attached to the hardtop that looked round in shape. There was a round magnet attached to the electronics box door. Open the door, and the two pieces conntect and voila! It's just what I need.

Anyone seen one or know what they are called? I looked in Boatfix but couldn't find anything. But then again, I don't really don't know what to search for.
 
You might try a non-marine source such as loweshomedepot or an RV supply. But I would be very careful about installing anything magnetic around my electronics and/or compass as it may interfere with proper operation of them. Try to find a nonmagnetic latch or such instead.
 
I'd do some velcro before magnets, because of what Liz said.
 
Hadn't thought of the compass and magnets. On my boat, the distance from the top to the compass is about 4 feet or more. Would that still be a concern? The only items in the electronics box are VHF and AM/FM. Depth and GPS are it dash below the compass.
 
Any hardware store should have strong non-rusting magnets of various sizes and shapes. I have 2 disc magnets on my fridge,1 1/2" dia x <3/16" thick. If you bond( Goop, epoxy, PC-7, 4200, etc.) one of each to door and hardtop it should hold the door easily as long as you mate N & S poles correctly. On mine , there is a completely flat surface and the opposite face has a small cylindrical indentation . Flat to smooth= very strong pull. Even singly on the fridge, the dics all-flat side holds MUCH stronger than the other.

At 4' your compass is... probably.. safe but watch for any compass swing before bonding. Your VHF and stereo speakers already have magnets and are probably not shielded. Note compass deviation may only show up on some headings and not at others.
 
quote:

I saw a "gizmo" on a new boat Sunday



I'd ask the salesmen for a part# on that. It can't be that hard to find out what it is.
 
Bayliners and then Meridians have used those since at least 1997 as door holders. The are quite powerful.

That which I have seen used most frequently for your application is a close wound spring designed to hold cabinets open.
 
What about those bendable springs. They bend when the door is closed and when you
open the door, the springs go straight and hold the door open.
 
Back
Top